Organisation for Economic Co-operation and Development

Chapter C includes indicators that are a mixture of outcome indicators, policy levers and context indicators. Internationalisation of education and progression rates are, for instance, outcome measures to the extent that they indicate the results of policies and practices at the classroom, school and system levels. But they can also provide contexts for establishing policy by identifying areas where policy intervention is necessary, for example, to address issues of inequity.

AEO (African Economic Outlook) Country Notes Tables, 2015

AEO (African Economic Outlook) Statistical Annex, 2015

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilisers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilizers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

commitment is a firm written obligation by a government or official agency, backed by the appropriation or availability of the necessary funds, to provide resources of a specified amount under specified financial terms and conditions and for specified purposes for the benefit of a recipient country or a multilateral agency. Members unable to comply with this definition should explain the definition that they use. -- Commitments are considered to be made at the date a loan or grant agreement is signed or the obligation is otherwise made known to the recipient (e.g. in the case of budgetary allocations to overseas territories, the final vote of the budget should be taken as the date of commitment). For certain special expenditures, e.g. emergency aid, the date of disbursement may be taken as the date of commitment. -- Bilateral commitments comprise new commitments and additions to earlier commitments, excluding any commitments cancelled during the same year. Cancellations and reductions in the year reported on of commitments made in earlier years are reported in the CRS, but not in the DAC questionnaire. -- In contrast to bilateral commitments, commitments of capital subscriptions, grants and loans to multilateral agencies should show the sum of amounts which are expected to be disbursed before the end of the next year and amounts disbursed in the year reported on but not previously reported as a commitment. For capital subscriptions in the form of notes payable at sight, enter the expected amount of deposits of such notes as the amount committed.

Destination of Official Development Assistance Disbursements. Geographical breakdown by donor, recipient and for some types of aid (e.g. grant, loan, technical co-operation) on a disbursement basis (i.e. actual expenditures). The data cover flows from bilateral and multilateral donors which focus on flows from DAC member countries and the EU Institutions.

This dataset contains bilateral commitment data on aid in support of environment sustainability and aid to biodiversity, climate change mitigation, climate change adaptation and desertification from the Development Assistance Committee (DAC) Creditor Reporting System (CRS) database. In their reporting to the DAC CRS, donors are requested to indicate for each activity whether or not it targets environment and the Rio Conventions (biodiversity, climate change mitigation, climate change adaptation and desertification). A scoring system of three values is used, in which aid activities are "marked" as targeting environment as the "principal objective" or a "significant objective", or as not targeting the objective. The environment marker identifies activities that are "intended to produce an improvement in the physical and/or biological environment of the recipient country, area or target group concerned" or "include specific action to integrate environmental concerns with a range of development objectives through institution building and/or capacity development". A large majority of activities targeting the objectives of the Rio Conventions fall under the DAC definition of "aid to environment". The Rio markers permit their specific identification.

This dataset contains commitment data (since 2002) and disbursement data (since 2009) on aid in support of gender equality from the CRS database. In their reporting to the Development Assistance Committee (DAC) Creditor Reporting System (CRS), donors are requested to indicate for each activity whether or not it targets gender equality as one of its policy objectives. To qualify as “gender equality focussed,” an activity must explicitly promote gender equality and women’s empowerment. An activity can either target gender equality as its “principal objective” or as a “significant objective”. A “principal” score (2) is assigned if gender equality was an explicit objective of the activity and fundamental to its design - i.e. the activity would not have been undertaken without this objective. A “significant” score (1) is assigned if gender equality was an important, but secondary, objective of the activity - i.e. it was not the principal reason for undertaking the activity. A “not targeted” score (0) is assigned if, after being screened against the gender equality policy marker, an activity is not found to target gender equality. Activities assigned a “principal objective” score should not be considered better than activities assigned a “significant objective” score, as donors that mainstream gender equality - and thus integrate it into their projects across a range of sectors - are more likely to allocate the marker score “significant” to their aid activities. The gender equality marker allows an approximate quantification of aid flows that target gender equality as a policy objective. In marker data presentations the figures for principal and significant objectives should be shown separately and the sum referred to as the “estimate” or “upper bound” of gender equality-focussed aid. An activity can have more than one principal or significant objective. Therefore, total amounts targeting the different objectives should not be added-up to avoid double-counting. Policy markers seek information on the donor’s policy objectives which can be best assessed at the design stage of projects. This is why policy markers are applied to commitments. Policy marker data on a disbursement basis can also be compiled, but it is important to note that this does not mean the policy objectives of projects under implementation would have been re-assessed. Rather, the disbursements are linked to the qualitative information on the original commitment through project identifiers. Consequently, a project marked as gender equality focussed at the commitment stage will be flagged as gender equality focussed throughout its lifetime, unless the qualitative information was changed. Activity-level gender equality marker data that underlie the aggregate figures presented in this dataset are available for consultation and download: see “Export”, “Related files”.

This database includes annual, quarterly and monthly information on carbon dioxide (CO2) emissions related to commercial passenger, freight, and general aviation flights, on both a territory and a residence basis, for 186 countries. These CO2 emissions are estimated by the OECD, based on a consistent methodology across countries. The main source used for the estimation of these CO2 emissions is a database compiled by the International Civil Aviation Organisation (ICAO) with all commercial passenger and freight flights around the world.

Residential Property Prices Indices (RPPIs) – also named House price indices (HPIs), are index numbers that measure the prices of residential properties over time. RPPIs are key statistics not only for citizens and households across the world, but also for economic and monetary policy makers. They can help, for example, to monitor potential macroeconomic imbalances and the risk exposure of the household and financial sectors. This dataset covers the 34 OECD member countries and some non-member countries. In addition to the nominal RPPIs it contains information on real house prices, rental prices and the ratios of nominal prices to rents and to disposable household income per capita. This dataset contains quarterly statistics for each country. House prices differ widely across OECD countries, both with respect to recent changes and to valuation levels. The OECD has identified one main nominal index for each country that covers the prices for the sale of newly-built and existing dwellings. The datasets “Analytical house price indicators” and “Residential Property Price Indices (RPPIs) – Headline Indicators” refer to the same price indices for all countries apart from Brazil, Canada, China, the United States and the Euro area. These differences are further documented in country-specific metadata. For the United States, the series used in “Analytical house price indicators” is included in the dataset called “Residential Property Price Indices (RPPIs) – Complete database”, but is not the headline indicator. For all other countries, non-seasonally adjusted price indices in both datasets are identical in the period in which they overlap. This research dataset provides extended time series coverage for many countries. The objective is to provide information on the long term trend of house prices and develop indicators which can be used to help track and analyse macroeconomic developments and risks. The extended data supplement the OECD RPPI data with historical data from a variety of sources, including other international organisations, central banks and national statistical offices. The methodological basis on the historical data and the types of geographical areas and dwellings they cover can differ from those used in the OECD RPPI data. The database contains a number of additional series. Real house prices are given by the ratio of seasonally adjusted nominal house prices to the seasonally adjusted consumers’ expenditure deflator in each country, from the OECD national accounts database. This provides information on how nominal house prices have changed over time relative to prices in the general economy. The rental prices come from the OECD Main Economic Indicators database and refer to Consumer Price Indices (CPIs) for Actual rentals for housing (COICOP 04.1). If this indicator is missing for a country, another indicator is chosen. The chosen indicator are usually those corresponding to the CPI aggregate for Housing including Actual rentals for housing (COICOP 04.1), imputed rentals for housing (COICOP 04.2) and Maintenance and repair of the dwelling (COICOP 04.3). The disposable income indicators come from the OECD national accounts database. Net household disposable income is used. The population data come from the OECD national accounts database. The price-to-rent ratio is given by the ratio of nominal house prices to rental prices. This is a measure of the profitability of owning a house. The price-to-income ratio is given by the ratio of nominal house prices to nominal household disposable income per capita. This is a measure of the affordability of purchasing a house. An indication that house prices may be overvalued is provided if either of these ratios is above their long-term averages. The standardised price-rent and price-income ratios show the current price-rent and price-income ratios relative to their respective long-term averages. The long-term average, which is used as a reference value, is calculated over the whole period available when the indicator begins after 1980 or 1980 if the indicator is available over a longer time period. The standardised ratio is indexed to a reference value equal to 100 over the full sample period. Values over 100 indicate that the present price-rent ratio, or price-income ratio, is above its long-run norms. This provides an indication of possible housing market pressures.

Annual Purchasing Power Parities and exchange rates: This table shows annual Purchasing Power Parities (PPPs) for Gross Domestic Product (GDP), household final consumption expenditure and actual individual consumption. It also shows exchange rates (annual averages and end of period), sourced from the International Monetary Fund's database on International Financial Statistics.

This dataset presents the average number of students in a class by type of institution.

The average effective age of retirement is calculated as a weighted average of (net) withdrawals from the labour market at different ages over a 5-year period for workers initially aged 40 and over. In order to abstract from compositional effects in the age structure of the population, labour force withdrawals are estimated based on changes in labour force participation rates rather than labour force levels. These changes are calculated for each (synthetic) cohort divided into 5-year age groups. The estimates shown in red are less reliable as they have been derived from interpolations of census data rather than from annual labour force surveys. The estimates for women in Turkey are based on 3-yearly moving averages of participation rates for each 5-year age group. OECD estimates based on the results of national labour force surveys, the European Union Labour Force Survey and, for earlier years in some countries, national censuses.

The balance of payments is a statistical statement that provides a systematic summary of economic transactions of an economy with the rest of the world, for a specific time period. The transactions are for the most part between residents and non-residents of the economy. A transaction is defined as an economic flow that reflects the creation, transformation, exchange, transfer, or extinction of economic value and involves changes in ownership, of goods or assets, the provision of services, labour or capital.  This dataset presents countries compiling balance of payments statistics in accordance with the 6th edition of the Balance of Payments and International Investment Position Manual published by the IMF (BPM6). Transactions include: the goods and services accounts, the primary income account (income account in BPM5), the secondary income account (transfers in BPM5), the capital account, and the financial account. Changes in BPM6 compared to BPM5 are often a consequence of a stricter application of the change of ownership principle in particular in the goods and services accounts. They relate to transactions on goods and services (merchanting, goods for processing, Insurance), income (investment income), and financial operations (direct investment) .

Since the collection of 2009 data, the scope of the OECD Global Insurance Statistics questionnaire has been expanded. These changes led to the collection of key balance sheet and income statement items for direct insurance and reinsurance sectors, such as: gross claims paid, outstanding claims provision (changes), gross operating expenses, commissions, total assets, gross technical provisions (of which: unit-linked), shareholder equity, net income.

This dataset present the Balanced Trade in Services (BaTIS) dataset published by OECD. It is a complete, consistent and balanced matrix of international trade in services statistics (ITSS). It contains annual bilateral data covering 202 reporters and partners, broken down by the 12 main EBOPS2010 (BPM6) categories.

This dataset presents a set of bibliometric indicators calculated using Elsevier's Scopus Custom Data, Version 5.2019; and Scimago Journal Rankings are used to calculate the top 10% most cited scientific publications.Elsevier assigns each journal in Scopus to one or more subjects using its All Science and Journal Classification (ASJC). There are 27 main fields comprising 334 subjects in the classification.This dataset is a small sample of the bibliometric indicators calculated using the Scopus Database. Different indicators will be presented in the Scoreboard platform (forthcoming).The following indicators are presented:FPUBS_NBFRAC: Total number of scientific publications, fractional counts. Publications are attributed to countries on the basis of the authors' institutional affiliations. Publications were fractionalised by contributing units; so that reported figures add up to the total number of publications (each document has the same weight). Fractional counts can be aggregated.TOP10FPUBS_NBFRAC: Total number of 10% top-cited scientific publications, fractional counts. The top 10% most cited documents is an indicator of excellence. This rate indicates the amount (in percentages) of a unit's scientific output that is included into the group of the 10% of the most cited papers in their respective scientific fields. It is a measure of high quality of research output of a unit, in this case the country. The indicator of scientific excellence is calculated at the document level using fractional counts. Documents organized by document type, ASJC field and year - are sorted in descending order based on the number of citations received. A threshold of 10% most cited documents is calculated for each category. Only documents with a fixed number of citations above the threshold are included. Documents with the same number of citations as the threshold are sorted according to the Scimago Journal Rankings (SJR) value of the journal in which they were published; those with the highest scores are selected. The citation window is based on the whole period, so top 10% most cited documents for the reference year uses whole period citations. No citation window is imposed as citation-based indicators are calculated on the basis of comparisons with documents published in the same year. The world average is 10% for the period.TOP10_X: The top 10% most cited documents is an indicator of excellence. This rate indicates the amount (in percentages) of a unit's scientific output that is included into the group of the 10% of the most cited papers in their respective scientific fields. The world average is 10% for the period.INTL_X: Percentage of scientific publications involving international collaboration. International collaboration refers to publications co-authored among institutions in different countries. Estimates are computed for each country by counting documents for which the set of listed affiliations includes at least one address within the country and one outside. Single-authored documents with multiple affiliations in different countries count as international collaboration.ISCORR_X: Percentage of corresponding/leading author scientific publications. Percentage corresponding or leading author documents, i.e. the share of scientific output where a domestic author is listed as a corresponding author. The scientific leadership indicator helps interpret the role of a given country in collaboration activities. The scientific leadership indicator shows the share of scientific output (in this case, documents by authors from a given country) where an author from this country is listed as leading author.NORMCIT_X: Normalised citation score, ratio of actual versus expected publications, percentage. Because of the differences in citation patterns of the fields and document types, field-based normalisation is required. The measure of normalised citation impact shows the relationship of the unit's average citation to the world's average, the unit is the country. The indicator is derived as the ratio between the average number of citations received by the documents published by authors affiliated to an institution in a given country and the world average of citations, over the same time period, by document type and subject area. Its value indicates how many times above (or below) the document has been cited above (or below) world average. For example, a value of 80 means the country is cited 20% below world average in that field and 130 means the country is cited 30% above average for that domain. The normalisation of citation values is item-oriented, i.e. carried out at the level of the individual document. If an article has been published in a journal allocated to more than one subject area, a mean value of the areas is calculated. The world average is 100.SPEC_I: The Relative Specialisation Index measures relative specialisation. This index is calculated by dividing all papers in a field from country a by the total production in all fields for country a, this proportion is then divided by the same proportion calculated at the world level. The world average is 1. A threshold has been set and the index has only been calculated for countries with 50 or more documents.

STAN Bilateral Trade Database by Industry and End-use category (BTDIxE) provides values of imports and exports (as well as re-imports and re-exports) of goods broken down by industrial sectors and by end-use categories. BTDIxE was designed to extend the old BTD database which provided bilateral trade in goods by industry only.  BTDIxE allows, for example, insights into the patterns of trade in intermediate goods between countries to track global production networks and supply chains, and it helps to address policy issues such as trade in value added and trade in tasks.  The database presents estimates of bilateral flows of goods from 1990 to the latest available year, i.e. 2018; the latest year shown is subject to the availability of underlying product-based annual trade statistics.  Reporters are the OECD member countries and a large number of non-OECD economies, including the BRIICS: Brazil, the Russian Federation, India, Indonesia, People's Republic of China and South Africa; other selected G20 and Asian economies; and major African and Latin American nations.  It should be noted that starting from mid-2012, the OECD and the United Nations agreed to centralise the data collection and processing procedures within UNSD Comtrade.  The list of partners covers the OECD countries, more than a hundred of non-member economies as well as the partners "World", "Rest of the World" and "Unspecified". The partner "Total foreign trade" corresponds to the flows with partner "World" excluding intra-country flows. Trade flows are divided into economic activities based on the Revision 4 of ISIC and nine end-use categories including capital goods, intermediate goods and household consumption.

Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2000 prices and PPPs). Variables collected This table presents research and development (R&D) expenditure statistics performed in the business enterprise sector by industry according to the International Standard Industrial Classification (ISIC) revision 3.1. and by type of costs (current expenditure, capital expenditure). Data at the industry level are presented beginning 1987, year when most of the countries converted from ISIC rev.2 to the current ISIC rev. 3 classification. This breakdown between industries is, in principle, made at the enterprise level, although some countries are able to break down R&D data for multi product enterprises between their main lines of business. National statistical regulations prevent publication of results where there are very few firms in the given category, hence the many gaps in the tables. Depending on the country, R&D institutes serving enterprises are either classified with the industry concerned, or grouped under “Research and Development” (ISIC rev.3.1, Division 73). When these R&D institutes are classified with the industry served, the evaluation of R&D in these industries is more complete and more comparable between countries for the industries concerned. This results, however, in an underestimation of the percentage of BERD performed by the service sector as compared with other countries. The Frascati Manual recommendation concerning data on R&D by industry is to report BERD on an enterprise basis (see FM section 3.4). When this is interpreted strictly, all the BERD of a diversified enterprise will be allocated to the industrial class of its principal activity. In circumstances where a few large firms dominate R&D spending in several areas, this can and does lead to underestimates of R&D associated with the secondary activities of the firms. Overall, R&D is therefore overestimated for some industries and underestimated for others. However, not all countries follow a strict enterprise basis for allocating R&D expenditures to industrial classes. Some countries make a disaggregation of the R&D of their largest, diversified firms into a number of different activities. In other countries, the enterprise approach has been abandoned and data are reported on a product field basis. This is why two classification criteria for BERD by industry are included in the table “BERD by industry” (see the variable CLASSIFICATION CRITERIA: Main activity or Product field) depending on which approach is more closely followed by each country (only a few countries currently collect these data both ways and are therefore included according to both criteria). However, this table “BERD by industry and type of costs” and the preceding one “BERD by industry and source of funds” present data for only one of the criteria, depending on the country.

Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2005 prices and PPPs). Variables collected This table presents research and development (R&D) expenditure statistics performed in the business enterprise sector by industry according to the International Standard Industrial Classification (ISIC) revision 3.1. and by source of funds (business enterprise, government, other national funds, and funds from abroad). Data at the industry level are presented beginning 1987, year when most of the countries converted from ISIC rev.2 to the current ISIC rev. 3 classification. This breakdown between industries is, in principle, made at the enterprise level, although some countries are able to break down R&D data for multi product enterprises between their main lines of business. National statistical regulations prevent publication of results where there are very few firms in the given category, hence the many gaps in the tables. Depending on the country, R&D institutes serving enterprises are either classified with the industry concerned, or grouped under “Research and Development” (ISIC rev.3.1, Division 73). When these R&D institutes are classified with the industry served, the evaluation of R&D in these industries is more complete and more comparable between countries for the industries concerned. This results, however, in an underestimation of the percentage of BERD performed by the service sector as compared with other countries. The Frascati Manual recommendation concerning data on R&D by industry is to report BERD on an enterprise basis (see FM section 3.4). When this is interpreted strictly, all the BERD of a diversified enterprise will be allocated to the industrial class of its principal activity. In circumstances where a few large firms dominate R&D spending in several areas, this can and does lead to underestimates of R&D associated with the secondary activities of the firms. Overall, R&D is therefore overestimated for some industries and underestimated for others. However, not all countries follow a strict enterprise basis for allocating R&D expenditures to industrial classes. Some countries make a disaggregation of the R&D of their largest, diversified firms into a number of different activities. In other countries, the enterprise approach has been abandoned and data are reported on a product field basis. This is why two classification criteria for BERD by industry are included in the table “BERD by industry” (see the variable CLASSIFICATION CRITERIA: Main activity or Product field) depending on which approach is more closely followed by each country (only a few countries currently collect these data both ways and are therefore included according to both criteria). However, this table “BERD by industry and source of funds” and the one that follows, “BERD by industry and type of costs” present data for only one of the criteria, depending on the country.

This table presents research and development (R&D) statistics on personnel in the business enterprise sector. Measured in full-time equivalent are the number of total R&D personnel and researchers in the business enterprise sector by industry according to the International Standard Industrial Classification (ISIC) revision 3.1. Data at the industry level are presented beginning 1987, year when most of the countries converted from ISIC rev.2 to the current ISIC rev. 3 classification.

The business tendency survey indicators cover a standard set of indicators for four economic sectors: manufacturing, construction, retail trade and other services. This includes an indicator of overall business conditions or business confidence in each sector. The consumer opinion survey indicators cover a restricted set of indicators on consumer confidence, expected economic situation and price expectations.   Business and consumer opinion (tendency) surveys provide qualitative information that has proved useful for monitoring the current economic situation. Typically they are based on a sample of enterprises or households and respondents are asked about their assessments of the current situation and expectations for the immediate future. For enterprise surveys this concerns topics such as production, orders, stocks etc. and in the case of consumer surveys their intentions concerning major purposes, economic situation now compared with the recent past and expectations for the immediate future. Many survey series provide advance warning of turning points in aggregate economic activity as measured by GDP or industrial production. Such series are known as leading indicators in cyclical analysis. These types of survey series are widely used as component series in composite leading indicators.   The main characteristic of these types of surveys is that instead of asking for exact figures, they usually ask for the direction of change e.g. a question on tendency by reference to a “normal” state, e.g. of production level. Possible answers are generally of the three point scale type e.g. up/same/down or above normal/normal/below normal for enterprise surveys and of the five point scale type e.g. increase sharply/increase slightly/remain the same/fall slightly/fall sharply for consumer surveys. In presenting the results as a time series, only the balance is shown. That is “same” or “normal” answers are ignored and the balance is obtained by taking the difference between percentages of respondents giving favourable and unfavourable answers.   Virtually all business tendency and consumer opinion survey data are presented as time series of balances in this dataset, either in raw or seasonally adjusted form. Very few series are presented as indices, and where these exist they have generally been converted from underlying balances by countries before submitting the data to the OECD.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Business written in the reporting country on a gross and net premium basis. It contains a breakdown between domestic companies, foreign-controlled companies and branches and agencies or foreign companies.

OECD Indicators on Carbon dioxide (CO2) emissions embodied in international trade (TeCO2) are derived by combining the 2021 editions of OECD Inter-Country Input-Output (ICIO) Database and of International Energy Agency (IEA) statistics on CO2 emissions from fuel combustion. In this release of TeCO2, emissions from fuels used for international aviation and maritime transport (i.e. aviation and marine bunkers) are also considered.Production-based CO2 emissions are estimated by allocating the CO2 emissions to the 45 target industries in OECD ICIO and, to household final consumption of fuels, by both residents and non-residents.Demand-based CO2 emissions are calculated by multiplying the intensities of the production-based emissions (c) with the global Leontief inverse (I-A)(-1) and global final demand matrix (Y) from OECD ICIO, taking the column sums of the resulting matrix and adding residential and private road emissions (FNLC), i.e. direct emissions from final demand: colsum [ diag(c) (I-A)(-1) Y ] + FNLC.For more information, see TeCO2 web page: http://oe.cd/io-co2.

This indicator reports the amount of carbon emissions from fossil fuel combustion embodied in imports and exports in mega tonnes of CO2 (MtCO2) for 63 countries and 34 industries between 1995 and 2011.

The indicator reports the hypothetical amount of carbon emissions from fossil fuel combustion embodied in imports if imported goods were produced with a carbon intensity (i.e. emissions factors) equal to that of the importing country at a given time – the Equal Carbon Intensity (ECI) assumption. It covers 65 countries and 34 industries between 1995 and 2011.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Commissions in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

The OECD Science, Technology and Industry Outlook 2012 presents, in a series of country profiles, the main features, strengths and weaknesses of national STI systems and major recent changes in national STI policy. The statistical dimension of the country profiles has drawn on the work and empirical research conducted by the OECD on the measurement of innovation and the development of internationally comparable STI indicators for policy analysis.   

Statistical population: CLIs are calculated for 33 OECD countries (Iceland is not included), 6 non-member economies and 8 zone aggregates. A country CLI comprises a set of component series selected from a wide range of key short-term economic indicators.   CLIs, reference series data (see below) and standardised business and consumer confidence indicators are presented in various forms.   Recommended uses and limitations: The composite leading indicator is a times series, formed by aggregating a variety of component indicators which show a reasonably consistent relationship with a reference series (e.g. industrial production IIP up to March 2012 and since then the reference series is GDP) at turning points. The OECD CLI is designed to provide qualitative information on short-term economic movements, especially at the turning points, rather than quantitative measures. Therefore, the main message of CLI movements over time is the increase or decrease, rather than the amplitude of the changes. The OECD’s headline indicator is the amplitude adjusted CLI. In practice, turning points in the de-trended reference series have been found about 4 to 8 months (on average) after the signals of turning points had been detected in the headline CLI.

This dataset provides information on the level of public equipment installed by countries to managed and abate water pollution. It shows the percentage of national population connected to "public" sewerage networks and related treatment facilities, and the percentage of national population connected to "public" wastewater treatment plants, and the degree of treatment. Connected here means actually connected to a wastewater plants through a public sewage network. When analysing these data, it should be kept in mind that the optimal connection rate is not necessarily 100%. It may vary among countries and depends on geographical features and on the spatial distribution of habitats. The interpretation of those data should take into account some variations in countries' definitions, as reflected in metadata. Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)

The 'Consumer Price Indices (CPIs)' contains all data that was previously contained in three different datasets: 'Consumer Prices', 'National Consumer Price Indices (CPIs) by COICOP divisions' and 'Harmonised Indices of Consumer Prices (HICPs) by COICOP divisions'. The 'Consumer Price Indices (CPIs)' dataset contains predominantly monthly statistics, and associated statistical methodological information, for the 36 OECD member countries and for some non-member countries. The ‘Consumer Price Indices (CPIs)' dataset contains statistics on Consumer Price Indices including national CPIs, Harmonised Indices of Consumer Prices (HICPs) and their associated weights and contributions to national annual inflation. The data series presented have been chosen as the most relevant prices statistics for which comparable data across countries is available. In all cases, a lot of effort has been made to ensure that the data are internationally comparable across all countries presented and that all the subjects have good historical time-series’ data to aid with analysis. Data are available monthly for all the countries except for Australia and New Zealand (quarterly data).

Note: CPA data for 2018 and 2019 are projections from the 2016 Survey on Forward Spending Plans. Country Programmable Aid (CPA), outlined in our Development Brief  and also known as “core” aid, is the portion of aid donors programme for individual countries, and over which partner countries could have a significant say. CPA is much closer than ODA to capturing the flows of aid that goes to the partner country, and has been proven in several studies to be a good proxy of aid recorded at country level. CPA was developed in 2007 in close collaboration with DAC members. It is derived on the basis of DAC statistics and was retroactively calculated from 2000 onwards

The country statistical profiles provide a broad selection of indicators, illustrating the demographic, economic, environmental and social developments, for all OECD members. The dataset also covers the five key partner economies with which the OECD has developed an enhanced engagement program with (Brazil, China, India, Indonesia and South Africa) ,accession countries (Colombia, Costa Rica and Lithuania) , Peru and the Russian Federation. The user can easily compare indicators across all countries. Total fertility rates - Unit of measure used: Number of children born to women aged 15 to 49

The objective of the CRS Aid Activity database is to provide a set of readily available basic data that enables analysis on where aid goes, what purposes it serves and what policies it aims to implement, on a comparable basis for all DAC members. Data are collected on individual projects and programmes. Focus is on financial data but some descriptive information is also made available.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business datawhere composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Click to collapse Item coverage Outstanding investment by direct insurance companies, classified by investment category, by the companies' nationality and by its destination (domestic or foreign). As of 2009, investment data exclude assets linked to unit-linked products sold to policyholders.

The OECD Digital STRI identifies, catalogues and quantifies barriers that affect trade in digitally enabled services across 46 countries. It provides policy makers with an evidence-based tool that helps to identify regulatory bottlenecks, design policies that foster more competitive and diversified markets for digital trade, and analyze the impact of policy reforms. The OECD Digital STRI captures cross-cutting impediments that affect all types of services traded digitally. As a stand-alone instrument, it complements the OECD Services Trade Restrictiveness Index (STRI).   STRI indices take the value from 0 to 1. Complete openness to trade and investment gives a score of zero, while being completely closed to foreign services providers yields a score of one.

The OECD Digital STRI heterogeneity indices complement the recently published Digital STRI's and presents indices of regulatory heterogeneity based on the rich information in the Digital STRI regulatory database. The indices are built from assessing – for each country pair and each measure – whether or not the countries have the same regulation. For each country pair and each sector, the indices reflect the (weighted) share of measures for which the two countries have different regulation.

Graduates/new entrants in each educational field as a percentage of the sum of graduates/new entrants in all fields.

Distribution of teachers by gender and different age groups.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

There has been a growing interest in monitoring patterns of trade in services around the world, which is partly associated with ongoing trade negotiations and partly due to the increasing importance of services in OECD economies. It has been developed to supplement other OECD publications on trade in services to address the data needs of trade analysts. It is also an important part of OECD's programme to facilitate the implementation of the recommendations of the revised Manual on Statistics of International Trade in Services 2010.Other commentsThe Task Force on Statistics of International Trade in Services maintains a matrix summarising the status of the trade in services data collection performed by International Organisations. The table displays links to the databases as well as update timetables, availability of metadata, availability of bilateral data, and other important characteristics.

Latest Version is available here: https://knoema.com/OECDEO2020DEC/economic-outlook-no-108-december-2020   Economic Outlook No 107 (EO107) 2/2   Given the unusual level of uncertainty caused by the Covid-19 pandemic, this Economic Outlook (EO107) presents two scenarios for each country and economy – one scenario in which a second outbreak occurs in most economies towards the end of this year (double-hit scenario) and an alternative scenario where the second outbreak is avoided (single-hit scenario).Furthermore, only a limited number of series is made available compared to past editions.   This data set presents the double-hit scenario.   The OECD Economic Outlook analyses the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in selected non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments, and government debt. For the non-OECD regions, foreign trade and current account series are available.   The database contains annual data (for all variables) and quarterly figures (for a subset of variables). Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labour Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was the 4 June 2020.   Concerning the aggregation of world trade, a new composition has been introduced, since projections are now made for the major non-OECD economies. Thus, besides OECD and the OECD euro area, the following new regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Azerbaijan, Kazakhstan, Turkmenistan, Brunei, Timor-Leste, Bahrain, Iran, Iraq, Kuwait, Libya, Oman, Qatar, Saudi Arabia, United Arab Emirates, Yemen, Ecuador, Trinidad and Tobago, Venezuela, Algeria, Angola, Chad, Rep. of Congo, Equatorial Guinea, Gabon, Nigeria, Sudan); with the remaining countries in a residual 'Rest of the World' group.

Latest version is available here: https://knoema.com/OECDEO2020DEC/economic-outlook-no-108-december-2020   Economic Outlook No 107 (EO107) 1/2   Given the unusual level of uncertainty caused by the Covid-19 pandemic, this Economic Outlook (EO107) presents two scenarios for each country and economy – one scenario in which a second outbreak occurs in most economies towards the end of this year (double-hit scenario) and an alternative scenario where the second outbreak is avoided (single-hit scenario).Furthermore, only a limited number of series is made available compared to past editions.   This data set presents the single-hit scenario.   The OECD Economic Outlook analyses the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in selected non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments, and government debt. For the non-OECD regions, foreign trade and current account series are available.   The database contains annual data (for all variables) and quarterly figures (for a subset of variables). Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labour Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was the 4 June 2020.   Concerning the aggregation of world trade, a new composition has been introduced, since projections are now made for the major non-OECD economies. Thus, besides OECD and the OECD euro area, the following new regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Azerbaijan, Kazakhstan, Turkmenistan, Brunei, Timor-Leste, Bahrain, Iran, Iraq, Kuwait, Libya, Oman, Qatar, Saudi Arabia, United Arab Emirates, Yemen, Ecuador, Trinidad and Tobago, Venezuela, Algeria, Angola, Chad, Rep. of Congo, Equatorial Guinea, Gabon, Nigeria, Sudan); with the remaining countries in a residual 'Rest of the World' group.

The OECD Economic Outlook analyses the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in major non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments and government debt. For the non-OECD regions, foreign trade and current account series are available. Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labour Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was June 1, 2023. The aggregation of world trade takes into account the projections made for the main non-OECD economies. Thus, besides OECD and the OECD euro area, the following regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Algeria, Angola, Azerbaijan Bahrain, Brunei, Chad, Rep. of Congo, Ecuador, Equatorial Guinea, Gabon, Iran, Iraq, Kazakhstan, Kuwait, Libya, Nigeria, Oman, Qatar, Saudi Arabia, Sudan, Timor-Leste, Trinidad and Tobago, Turkmenistan, United Arab Emirates, Yemen, Venezuela); with the remaining countries in a residual 'Rest of the World' group.

The OECD Economic Outlook analyses the major economic trends over the coming 2 to 3 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in major non-OECD economies are also evaluated in detail. Each edition of this Outlook provides a unique tool to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest rates and exchange rates, the balance of payments, government and of households, and government debt. For the non-OECD regions, foreign trade and current account series are available. The database contains annual and quarterly data for the historical period and for the projection period. For this latter period, quarterly data are available for the G7 countries, and the OECD regions, while annual data are available for all OECD countries and for non-OECD regions. Quarterly series are seasonally adjusted. Variables are defined in such a way that they are as homogenous as possible over the countries. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD statistical publications such as the Quarterly National Accounts, the Annual National Accounts, the Annual Labour Force Statistics and the Main Economic Indicators.

The OECD Economic Outlook analyses the major economic trends over the coming 2 to 3 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in major non-OECD economies are also evaluated in detail. Each edition of this Outlook provides a unique tool to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest rates and exchange rates, the balance of payments, government and of households, and government debt. For the non-OECD regions, foreign trade and current account series are available. The database contains annual and quarterly data for the historical period and for the projection period. For this latter period, quarterly data are available for the G7 countries, and the OECD regions, while annual data are available for all OECD countries and for non-OECD regions. Quarterly series are seasonally adjusted. Variables are defined in such a way that they are as homogenous as possible over the countries. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD statistical publications such as the Quarterly National Accounts, the Annual National Accounts, the Annual Labour Force Statistics and the Main Economic Indicators.

Current data with full Archive version is available here: https://knoema.com/OECDEO2020DEC/economic-outlook-no-108-december-2020  

Current data with full Archive version is available here: https://knoema.com/OECDEO2020DEC/economic-outlook-no-108-december-2020

 The OECD Economic Outlook analyses the major economic trends over the coming 2 to 3 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in major non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments, and government debt. For the non-OECD regions, foreign trade and current account series are available. The database contains annual for the projection period. Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD statistical publications such as the Quarterly National Accounts, the Annual National Accounts, the Labour Force Statistics and the Main Economic Indicators. The cut-off date for information used in the compilation of the projections was the 29 May 2015. Concerning the aggregation of world trade, a new composition has been introduced, since projections are now made for the major non-OECD economies. Thus, besides OECD and the OECD euro area, the following new regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Azerbaijan, Kazakhstan, Turkmenistan, Brunei, Timor-Leste, Bahrain, Iran, Iraq, Kuwait, Libya, Oman, Qatar, Saudi Arabia, United Arab Emirates, Yemen, Ecuador, Trinidad and Tobago, Venezuela, Algeria, Angola, Chad, Rep. of Congo, Equatorial Guinea, Gabon, Nigeria, Sudan); with the remaining countries in a residual 'Rest of the World' group.

The data presented in this table are addressing one of the seven quality of life dimensions that have been identified within the framework of Education and Social Outcomes. The seven dimensions are: Health status, Work-life balance, Social connections, Civic engagement and governance, Environment, Personal safety and Subjective well-being.

This indicator presents internationally comparable data regarding the labour force status and the educational attainment level by the National Educational Attainment Categories (NEAC) as reported by the labour force survey (LFS) and published in OECD Education at a Glance 2017. For trend data, the Education at a Glance Database includes data from 1981 to 2016 (or years with available data).

The nature of expenditure distinguishes between current and capital expenditure. The resource category refers to service provider (public institutions, government-dependent private institutions, and independent private institutions, i.e. both educational and other institutions). These expenditure figures are intended to represent the total cost of services provided by each type of institution, without regard to sources of funds (whether they are public or private).

All entities that provide funds for education, either initially or as final payers, are classified as either governmental (public) sources or non-governmental (private) sources, the sole exception being "international agencies and other foreign sources", which are treated as a separate category. There are three types of financial transactions: Direct expenditure on educational institutions; Transfers to students or households and to other private entities; and Households' expenditure on education outside educational institutions.

These indicators on expenditure on education are published in chapter C of Education at a Glance, which covers financial and human resources invested in education.They are either policy levers or provide context information on education systems, or sometimes both. For example, expenditure per student is a key policy measure that most directly affects the individual learner, as it acts as a constraint on the learning environment in schools and learning conditions in the classroom.The data set “educational finance indicators” provides the main indicators computed for three levels of education : primary, secondary and post-secondary non-tertiary levels combined; tertiary level; and primary to tertiary levels combined. Other datasets provide more breakdowns for each specific indicator.

The classification of personnel is based on functions and organises staff into four main functional categories: 1) Instructional Personnel; including two sub-groups: A. Classroom Teachers (ISCED 0-4) and Academic Staff (ISCED 5-6); and B. Teacher Aides (ISCED 0-4) and Teaching / Research Assistants (ISCED 5-6); 2) Professional Support for Students; including two sub-groups: A. Pedagogical Support (ISCED 0-4) and Academic Support (ISCED 5-6); B. Health and Social Support (ISCED 0-6); 3) Management/Quality Control/Administration; including four subgroups: A. School Level Management (ISCED 0-6); B. Higher Level Management (ISCED 0-6); C. School Level Administrative Personnel (ISCED 0-6); and D. Higher Level Administrative Personnel (ISCED 0-6); 4) Maintenance and Operations Personnel.

These tables are a complement to the report Agricultural Policy Monitoring and Evaluation 2011 : OECD COUNTRIES AND EMERGING ECONOMIES. They comprise the summary of agricultural support estimates for OECD countries.

These tables are a complement to the report Agricultural Policy Monitoring and Evaluation 2012 : OECD COUNTRIES. They comprise the summary of agricultural support estimates for OECD countries.

These tables are a complement to the report Agricultural Policy Monitoring and Evaluation 2011 : OECD COUNTRIES AND EMERGING ECONOMIES. They comprise the summary of agricultural support estimates for OECD countries.

2011 G) Emerging Economies: Consumer Support Estimate by Country These tables are a complement to the report Agricultural Policy Monitoring and Evaluation 2011 : OECD COUNTRIES AND EMERGING ECONOMIES. They comprise the summary of agricultural support estimates for OECD countries. NPC: Nominal Protection Coefficient. NAC: Nominal Assistance Coefficient.

These tables are a complement to the report Agricultural Policy Monitoring and Evaluation 2011 : OECD COUNTRIES AND EMERGING ECONOMIES. They comprise the summary of agricultural support estimates for OECD countries. TSE : Total support estimate.

2011 E) Emerging Economies: Producer Support Estimate by Country These tables are a complement to the report Agricultural Policy Monitoring and Evaluation 2011 : OECD COUNTRIES AND EMERGING ECONOMIES. They comprise the summary of agricultural support estimates for OECD countries. NPC: Nominal Protection Coefficient. NAC: Nominal Assistance Coefficient.  

These tables are a complement to the report Agricultural Policy Monitoring and Evaluation 2011 : OECD COUNTRIES AND EMERGING ECONOMIES. They comprise the summary of agricultural support estimates for OECD countries.

Compared to men, women are less likely to work full-time, more likely to be employed in lower-paid occupations, and less likely to progress in their careers. As a result gender pay gaps persist and women are more likely to end their lives in poverty. This data looks at how many men and women are in paid work, who works full-time, and how having children and growing older affect women’s work patterns and earnings differently to men’s. It looks at how women bear the brunt of domestic and family responsibilities, even when working full-time. It also considers the benefits for businesses of keeping skilled women in the workplace, and encouraging them to sit on company boards. It looks at women’s representation in parliaments, judicial systems, and the senior civil service. It examines male and female employment in the wake of the crisis, and how women tend to be confined to the most vulnerable categories within the informal sector in developing countries.

Number of students by level of education, adjusted to the financial year. When financial year, school year and calendar year differs, adjustments are made to ease comparison.

Enrolment rate per age is the percentage of students enrolled in each type of institution over the total of students

This indicator examines the share of students by gender, programme orientation, mode of study and type of institution over the total number of students.

Number of students by level of education, adjusted to the financial year. When financial year, school year and calendar year differs, adjustments are made to ease comparison.

Number of students enrolled in different education programmes by country of origin and sex.

Entrepreneurship is crucial to economic development, promoting social integration and reducing inequalities. The Gender-entrepreneurship dataset presents an original collection of indicators that measure gender equality in entrepreneurship, providing an important reference for policy insights and policy making. Data refer mainly to the self-employed, their profile, age, education and sector of activity.

The OECD Environmental Policy Stringency Index (EPS) is a country-specific and internationally-comparable measure of the stringency of environmental policy. Stringency is defined as the degree to which environmental policies put an explicit or implicit price on polluting or environmentally harmful behaviour. The index ranges from 0 (not stringent) to 6 (highest degree of stringency). The index covers 28 OECD and 6 BRIICS countries for the period 1990-2012. The index is based on the degree of stringency of 14 environmental policy instruments, primarily related to climate and air pollution.

EAMFP growth measures the residual growth in the joint production of both the desirable and the undesirable outputs that cannot be explained by changes in the consumption of factor inputs (including labour, produced capital and natural capital). Therefore, for a given growth of input use, EAMFP increases when GDP increases or when pollution decreases. As part of the growth accounting framework underlying the EAMFP indicator, the growth contribution of natural capital and growth adjustment for pollution abatement indicators are derived: Growth contribution of natural capital - measures to what extent a country's growth in output is attributable to natural resource use; Growth adjustment for pollution abatement - measures to what extent a country's GDP growth should be corrected for pollution abatement efforts - adding what has been undervalued due to resources being diverted to pollution abatement, or deducing the ‘excess' growth which is generated at the expense of environmental quality.

Countries report expenditures by sources of funds: Governement (central, regional, local); International agencies and other foreign sources; Households and Other private entities (including firms and religious institutions and other non-profit organisations). Three types of financial transactions can be distinguished: -direct expenditure/payments on educational institutions -Intergovernmental transfers for education -Transfers to students or households and to other private entities.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) has potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. The underlying PM2.5 concentrations estimates are taken from van Donkelaar et al. (2016). They have been derived using satellite observations and a chemical transport model, calibrated to global ground-based measurements using Geographically Weighted Regression at 0.01° resolution. The underlying population data, Gridded Population of the World, version 4 (GPWv4) are taken from the Socioeconomic Data and Applications Center (SEDAC) at the NASA. The underlying boundary geometries are taken from the Global Administrative Unit Layers (GAUL) developed by the FAO, and the OECD Territorial Classification, when available. The current version of the database presents much more variation with respect to the previous one. The reason is that the underlying concentration estimates previously included smoothed multi-year averages and interpolations; while in the current version annual concentration estimates are used. Establishing trends of pollution exposure should be done with care, especially at smaller output areas, as their inputs (e.g. underlying data and models) can change from year to year. We recommend using a 3-year moving average for visualisation.

In view of the strong demand for cross-national indicators on the situation of families and children, the OECD Family Database was developed to provide cross-national indicators on family outcomes and family policies across the OECD countries, its enhanced engagement partners and EU member states. The database brings together information from various national and international databases, both from within the OECD and from external organisations. The database classifies indicators into four main dimensions: (i) structure of families, (ii) labour market position of families, (iii) public policies for families and children and (iv) child outcomes. Detailed information on the definitions, sources and methods used in the construction of the database can be found on the OECD Family Database webpage.

FDI data are based on statistics provided by 35 OECD member countries and by Lithuania. BMD4: OECD Benchmark Definition of Foreign Direct Investment - 4th Edition

This dataset FDI flows main aggregates, BMD4 is updated every quarter and includes annual and quarterly aggregate Foreign Direct Investment (FDI) flows for OECD member countries and for non-OECD G20 countries (Argentina, Brazil, China, India, Indonesia, Saudi Arabia and South Africa), which are included in Balance of Payments (BOP) accounts. FDI flows record the value of cross-border transactions related to direct investment during a given period of time, usually a quarter or a year, and consist of equity transactions, reinvestment of earnings, and intercompany debt transactions.

FDI statistics cover all entities in an FDI relationship. An FDI relationship is established when an investor in one country acquires 10% or more of the voting power in a business enterprise in another country. The investor is also called a direct investor or a parent and the business enterprise is called a direct investment enterprise or an affiliate. The 10 percent criteria is used to establish that the direct investor has a significant degree of influence over the operations of the direct investment enterprise. The FDI population includes affiliates that are directly and indirectly owned by the parent. In direct ownership, the parent owns the 10% or more voting power itself. In indirect ownership, the parent controls an affiliate that in turn owns 10 percent or more of the voting power in another enterprise. The FDI population also includes enterprises that are not in a direct investment relationship themselves but have a direct investor in common. Called fellow enterprises, they are included because, even though there is no direct investment relationship between the two, any transactions between them likely resulted from the influence that their common direct investor has on both of their operations.

This dataset FDI positions by counterpart area, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by partner country for OECD reporting economies.  Inward and outward FDI positions by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions, in millions of national currency and as a share of total FDI positions.

This dataset FDI positions by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by economic activity according to ISIC4 for OECD reporting economies.

This dataset FDI positions main aggregates, BMD4 is updated every quarter and includes annual aggregate Foreign Direct Investment (FDI) positions for OECD member countries and for non-OECD G20 countries (Argentina, Brazil, China, India, Indonesia, Saudi Arabia and South Africa), which are included in International Investment Position (IIP) accounts. FDI positions record the total level of direct investment at a given point in time, usually the end of a quarter or of a year.

The FDI Regulatory Restrictiveness Index (FDI Index) measures statutory restrictions on foreign direct investment across 22 economic sectors. It gauges the restrictiveness of a country’s FDI rules by looking at the four main types of restrictions on FDI: 1) Foreign equity limitations; 2) Discriminatory screening or approval mechanisms; 3) Restrictions on the employment of foreigners as key personnel and 4) Other operational restrictions, e.g. restrictions on branching and on capital repatriation or on land ownership by foreign-owend enterprises. Restrictions are evaluated on a 0 (open) to 1 (closed) scale. The overall restrictiveness index is the average of sectoral scores. The discriminatory nature of measures, i.e. when they apply to foreign investors only, is the central criterion for scoring a measure. State ownership and state monopolies, to the extent they are not discriminatory towards foreigners, are not scored. The FDI Index is not a full measure of a country’s investment climate. A range of other factors come into play, including how FDI rules are implemented. Entry barriers can also arise for other reasons, including state ownership in key sectors. A country’s ability to attract FDI will be affected by others factors such as the size of its market, the extent of its integration with neighbours and even geography among other. Nonetheless, FDI rules can be a critical determinant of a country’s attractiveness to foreign investors.

Chapter B includes indicators that are either policy levers or antecedents to policy, or sometimes both. For example, expenditure per student is a key policy measure that most directly affects the individual learner, as it acts as a constraint on the learning environment in schools and learning conditions in the classroom.

National Accounts - Volume IIIb - Financial Balance Sheets - Stocks, which record the stocks of financial assets and liabilities by institutional sectors, at the end of the accounting period, and are presented in two tables: Balance sheets for financial assets and liabilities, consolidated and Balance sheets for financial assets and liabilities, non consolidated.

The financial indicators in this dataset are derived from OECD countries’ financial accounts (transactions): they give a picture of the short-term behavior of institutional sectors. They comprise for instance: Net financial transactions of the general government, as a percentage of Gross Domestic Product (GDP), which corresponds to the general government deficit; Transactions in financial assets of Households and NPISHs, as a percentage of Households Gross Disposable Income (GDI); Transactions in liabilities of Households and NPISHs, as a percentage of GDI.

The financial indicators in this dataset are constructed from OECD countries’ financial balance sheets (stocks): these ratios are considered as relevant to analyse the position and performance of the various institutional sectors. They comprise for instance: Financial net worth of Households and NPISHs, as a percentage of GDI; Non-financial corporations debt to equity ratio; Private sector debt; Leverage of the banking sector; General government debt, as a percentage of GDP.

National Accounts - Volume IIIa - Financial Accounts - Flows, which record, by type of financial instruments, the financial transactions between institutional sectors, and are presented in two tables: Financial accounts, consolidated and Financial accounts, non-consolidated.

The Financial account, which is the second accumulation account, records financial flows: it indicates the types of financial instruments utilized by the different institutional sectors to acquire financial assets or incur liabilities. Data are compiled either by Central banks, or Statistical National Institutes. EU data are validated and provided by the European Central Bank whereas non-EU data are provided by national institutions.

The dataset Fisheries International collaboration in technology development (bilateral) provides the number of co-inventions (simple patent families) developed jointly by at least two inventors. This indicator is disaggregated by: Country - country of residence of the inventor(s), integral counted; in cases when inventors from more than two countries collaborate, this is translated into distinct bilateral relationships between country pairs. For example, if inventors from 3 countries collaborate (e.g. USA, DEU, JPN) then a unit count is assigned to 6 country pairs (USA-DEU, USA-JPN, DEU-JPN, DEU-USA, JPN-USA, JPN-DEU); in this case a country generally coordinate the project and the others are partners. Partner – country of residence of the inventor(s) who collaborate to the patent. Technology domain – the three main areas of innovation in fisheries and aquaculture, related to technology development. In detail: 1. Harvesting technology such as more effective ways to find or harvest fish and which are typically associated with improvements in catch per unit of effort (e.g. type/size of vessels and their methods of propulsion, search technologies, method of catching or harvesting fish and bringing them on board); 2.Aquaculture technology such as methods to more effectively grow fish in captivity (innovation in feeds, improving the health of aquaculture animals, etc.); 3. New products and markets such as the development of new fish products and markets (food technologies/processing such as the development of surimi as a crabmeat substitute) and the improvement of market access (secure or enlarge markets for fish products) that provides important incentives for green growth (e.g. eco-certification with fishers adopting by-catch saving technologies or modifying fishing practices and/or territorial user rights in fisheries).

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The number of students enrolled refers to the count of students studying in the reference period. Each student enrolled in the education programmes covered by the corresponding category is counted once and only once. National data collection systems permitting, the statistics reflect the number of students enrolled at the beginning of the school / academic year. Preferably, the end (or near-end) of the first month of the school / academic year is chosen (special arrangements are made for part-year students who may not start studies at the beginning of the school year). Students are classified as foreign students (non-citizens) if they are not citizens of the country in which the data are collected. While pragmatic and operational, this classification is inappropriate for capturing student mobility because of differing national policies regarding the naturalisation of immigrants. Countries that have lower propensity to grant permanent residence to its immigrant populations are likely to report second generation immigrants as foreign students. Therefore, for student mobility and bilateral comparisons, interpretations of data based on the concept of foreign students should be made with caution. Students are classified as international students if they left their country of origin and moved to another country for the purpose of study. Depending on country-specific immigration legislation, mobility arrangements, and data availability, international students may be defined as students who are not permanent or usual residents of their country of study or alternatively as students who obtained their prior education in a different country, including another EU country.

FDI statistics cover all entities in an FDI relationship. An FDI relationship is established when an investor in one country acquires 10% or more of the voting power in a business enterprise in another country. The investor is also called a direct investor or a parent and the business enterprise is called a direct investment enterprise or an affiliate. The 10 percent criteria is used to establish that the direct investor has a significant degree of influence over the operations of the direct investment enterprise.   The FDI population includes affiliates that are directly and indirectly owned by the parent. In direct ownership, the parent owns the 10% or more voting power itself. In indirect ownership, the parent controls an affiliate that in turn owns 10 percent or more of the voting power in another enterprise.   The FDI population also includes enterprises that are not in a direct investment relationship themselves but have a direct investor in common. Called fellow enterprises, they are included because, even though there is no direct investment relationship between the two, any transactions between them likely resulted from the influence that their common direct investor has on both of their operations.

Key statistical concept Although there are clear definitions for all the terms used in this survey, countries might have different methodologies to calculate tonne-kilometer and passenger-kilometers. Methods could be based on traffic or mobility surveys, use very different sampling methods and estimating techniques which could affect the comparability of their statistics. Also, if the definition on road fatalities is very clear and well applied by most countries, this is not the case for road injuries. Indeed, not only countries might have different definitions but the important underreporting of road injuries in most countries can distort analysis based on these data.

Freshwater abstractions:   This dataset shows water abstractions by source (surface and ground water) and by major uses. Water abstractions refer to water taken from ground or surface water sources and conveyed to the place of use. If the water is returned to a surface water source, abstraction of the same water by the downstream user is counted again in compiling total abstractions.   When interpreting those data, it should be borne in mind that the definitions and estimation methods employed by member countries may vary considerably.   Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)  

Date is taken as per country metadata, and which is not having any metadata date is considered as 2023

This table contains data on full-time and part-time employment based on a common definition of 30-usual weekly hours of work in the main job. Data are broken down by professional status - employees, total employment - sex and standardised age groups (15-24, 25-54, 55+, total). Unit of measure used - Data are expressed in thousands of persons.

This dataset contains incidences and gender composition of part-time employment with standardised age groups (15-24, 25-54, 55-64, 65+, total). Part-time employment is based on national definitions.  The definition of part-time work varies considerably across OECD countries Essentially three main approaches can be distinguished: i) a classification based on the worker’s perception of his/her employment situation; ii) a cut-off (generally 30 or 35 hours per week) based on usual working hours, with persons usually working fewer hours being considered part-timers; iii) a comparable cut-off based on actual hours worked during the reference week. A criterion based on actual hours will generally yield a part-time rate higher than one based on usual hours, particularly if there are temporary reductions in working time as a result of holidays, illness, short-timing, etc. On the other hand, it is not entirely clear whether a classification based on the worker’s perception will necessarily yield estimates of part-time work that are higher or lower than one based on a fixed cut-off. In one country (France) which changed from 1981 to 1982 from a definition based on an actual hours cut-off (30 hours) to one based on the respondent’s perception, the latter criterion appeared to produce slightly higher estimates.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at:http://www.oecd.org/dataoecd/0/49/38356329.pdf. Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at: http://www.oecd.org/dataoecd/0/49/38356329.pdf.  Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

The Future of Business Survey is an original source of information on small and medium-sized enterprises (SMEs). Launched in February 2016, the survey is a partnership between Facebook, OECD, and the World Bank. It provides timely information on business owners’ assessment of the current state and future outlook of their business, job creation perspectives, main business challenges and participation in international trade. Several data breakdowns are available, in particular by size of the enterprise, age, sector, trading status and gender of owners or managers.

This dataset contains statistics on Consumer Price Indices - all items, for G20 countries and for the G20 as a whole.  The G20 area consists of the following economies: Argentina, Australia, Brazil, Canada, China, France, Germany, India, Indonesia, Italy, Japan, Korea, Mexico, the Russian Federation, Saudi Arabia, South Africa, Türkiye, the United Kingdom, the United States, the African Union and the European Union. 

The GID-DB is a database providing researchers and policymakers with key data on gender-based discrimination in social institutions. This data helps analyse women’s empowerment and understand gender gaps in other key areas of development.Covering 180 countries and territories, the GID-DB contains comprehensive information on legal, cultural and traditional practices that discriminate against women and girls.

This part contains general information on number of insurance companies and employees within the sector.

This dataset presents data on waste by economic sector, using the major divisions of the International Standard Industrial Classification (ISIC), revision 4. Data source(s): OECD/Eurostat joint questionnaire on waste. Source for non-OECD countries: UNSD, Country Files from the UNSD/UNEP data collection on environment statistics (available at: https://unstats.un.org/unsd/envstats/country_files).

This table provides information on the main relevant indicators. The data have mainly been supplied by the World Bank, and cover, where available: -Current Gross National Income (GNI) in US $ millions; -GNI per capita (US $); -Population; -Energy use as kilogram of oil per capita; -Average Life Expectancy of Adults; and -Adult Literacy Rate as a percentage of the country population. Data for Sudan include South Sudan, with the exception of total population, which is reported separately.

Bilateral ODA commitments by purpose. Data cover the years 2005 to 2009. Amounts are expressed in USD million. The sectoral distribution of bilateral ODA commitments refers to the economic sector of destination (i.e. the specific area of the recipient's economic or social structure whose development is, or is intended to be fostered by the aid), rather than to the type of goods or services provided. These are aggregates of individual projects notified under the Creditor Reporting System, supplemented by reporting on the sectoral distribution of technical co-operation, and on actual disbursements of food and emergency aid.

This data set contains information of The insurance industry is a major component of the economy by virtue of the amount of premiums it collects, the scale of its investment and, more fundamentally, the essential social and economic role it plays by covering personal and business risks. This annual report monitors global insurance market trends to support a better understanding of the insurance industry's overall performance and health.The OECD has collected and analysed data on insurance such as the number of insurance companies and employees, insurance premiums and investments by insurance companies dating back to the early 1980s. Over time, the framework of this exercise has expanded and now includes key balance sheet and income statement items for the direct insurance and reinsurance sector.

This data set combines the different regional publications of Revenue Statistics:Revenue Statistics 2019OECD/ATAF/AUC (2019), Revenue Statistics in Africa 2019OECD et al (2020), Revenue Statistics in Latin America and the Caribbean 2020 (LAC)Revenue Statistics in Asian and Pacific Economies 2019 Revenue Statistics The annual statistical publications present a unique set of detailed and internationally comparable tax revenue data in a common format. Its approach is based on the well-established methodology of the OECD Revenue Statistics (OECD, 2019), which has become an essential reference. It provides a conceptual framework defining which government receipts should be regarded as taxes and classifies different types of taxes. Comparable tables show revenue data by type of tax in national currency, as a percentage of GDP, and, for the different types of taxes, as a share of total taxation. Comparisons are also made with the averages of the 36 OECD economies, of the 24 LAC countries (two of which are OECD members countries° and of 26 African countries.   The data set does not replace the other publications, and users are advised to consult the regional data sets for country specific information.

Going for Growth helps to promote sustainable economic growth and improve the well-being of OECD citizens. The surveillance is based on a systematic and in-depth analysis of structural policies and their outcomes across OECD members, relying on a set of internationally comparable and regularly updated policy indicators with a well-established link to performance. From one issue to the next, Going for Growth follows up on these recommendations and priorities evolve, not least as a result of governments taking action, http://www.oecd.org/eco/going-for-growth/. This dataset contains time series of a comprehensive set of quantitative indicators that allow for a comparison of policy settings across OECD countries and selected non-member economies: Argentina, Brazil, China, Colombia, Costa Rica, India, Indonesia, Lithuania, the Russian Federation and South Africa. The dataset covers several areas: Product market regulation (economy-wide and sector-specific regulation), Education, Public investment and subsidies, Taxation, Labour market, Transfers. Data are consistent with those published in the Structural Policy Indicators chapter of Going for Growth 2018. The cut-off date is December 2017.

Graduates are those who successfully complete an educational programme during the reference year of the data collection. One condition of a successful completion is that students should have enrolled in, and successfully completed, the final year of the corresponding educational programme, although not necessarily in the year of reference. Students who do not complete the final year of an educational programme, but later successfully complete a recognised "equivalency" examination based on knowledge learned outside of the education system, should not be counted as graduates. Successful completion is defined according to the graduation requirements established by each country: in some countries, completion occurs as a result of passing a final, curriculum-based examination or series of examinations. In other countries, completion occurs after a specific number of teaching hours has been accumulated (although completion of some or all of the course hours may also involve examinations).

Graduates are those who successfully complete an educational programme during the reference year of the data collection. One condition of a successful completion is that students should have enrolled in, and successfully completed, the final year of the corresponding educational programme, although not necessarily in the year of reference. Students who do not complete the final year of an educational programme, but later successfully complete a recognised "equivalency" examination based on knowledge learned outside of the education system, should not be counted as graduates. Successful completion is defined according to the graduation requirements established by each country: in some countries, completion occurs as a result of passing a final, curriculum-based examination or series of examinations. In other countries, completion occurs after a specific number of teaching hours has been accumulated (although completion of some or all of the course hours may also involve examinations).

Graduation/entry rates represent an estimated percentage of an age group expected to graduate/enter a certain level of education at least once in their lifetime.

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

This dataset presents trends in man-made emissions of major greenhouse gases and emissions by gas.   Data refer to total emissions of CO2 (emissions from energy use and industrial processes, e.g. cement production), CH4 (methane emissions from solid waste, livestock, mining of hard coal and lignite, rice paddies, agriculture and leaks from natural gas pipelines), nitrous oxide (N2O), hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3). Data exclude indirect CO2.   Intensities (per unit of GDP and per capita) as well as index are calculated on gross direct emissions excluding emissions or removals from land-use, land-use change and forestry (LULUCF).   The GDP used to calculate intensities is expressed in USD at 2010 prices and PPPs.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Gross claims payments in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

This table contains research and development (R&D) expenditure statistics on gross domestic R&D expenditure by sector of performance (business enterprise, government, higher education, private non-profit, and total intramural) and by field of science (natural sciences, engineering, medical sciences, agricultural sciences, social sciences, and humanities). Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2010 prices and PPPs).

Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2010 prices and PPPs). Variables collected This table presents research and development (R&D) expenditure statistics. Data include gross domestic R&D expenditure by sector of performance (business enterprise, government, higher education, private non-profit, and total intramural) and by type of costs (current expenditures: labour costs, other current costs; and capital expenditures: land and buildings, and instruments and equipment).

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. This part contains gross operating expenses in the reporting country, with a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

Productivity is a key driver of economic growth and changes in living standards. Labour productivity growth implies a higher level of output for unit of labour input (hours worked or persons employed). This can be achieved if more capital is used in production or through improved overall efficiency with which labour and capital are used together, i.e., higher multifactor productivity growth (MFP). Productivity is also a key driver of international competitiveness, e.g. as measured by Unit Labour Costs (ULC).   The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, some time lag may arise which affects individual series and/or countries for two reasons: first, hours worked data from the OECD Employment Outlook are typically updated less frequently than the OECD Annual National Accounts Database; second, source data for capital services are typically available in annual national accounts later than source data for labour productivity and ULCs.   Note to users: The OECD Productivity Database accounts for the methodological changes in national accounts' statistics, such as the implementation of the System of National Accounts 2008 (2008 SNA) and the implementation of the international industrial classification ISIC Rev.4. These changes had an impact on output, labour and capital measurement. For Chile, China, Colombia, India, Japan, Turkey and the Russian Federation the indicators are in line with the System of National Accounts 1993 (1993 SNA); for all other countries, the indicators presented are based on the 2008 SNA

Cancer follow up has been given for the range of 5 years. The highest range has been considered as for this period, for example 1995-2000 is considered as 2000.

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.B1:B4

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

A System of Health Accounts 2011 provides an updated and systematic description of the financial flows related to the consumption of health care goods and services. As demands for information increase and more countries implement and institutionalise health accounts according to the system, the data produced are expected to be more comparable, more detailed and more policy relevant. It builds on the original OECD Manual, published in 2000 to create a single global framework for producing health expenditure accounts that can help track resource flows from sources to uses. It is the result of a collaborative effort between the OECD, WHO and the European Commission, and sets out in more detail the boundaries, the definitions and the concepts – responding to health care systems around the globe – from the simplest to the more complicated. The accounting framework is organised around a tri-axial system for the recording of health care expenditure, namely classifications of the functions of health care (ICHA-HC), health care provision (ICHA-HP), and financing schemes (ICHA-HF).

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

This dataset presents annual population data from 1950 to 2050 by sex and five year age groups as well as age-dependency ratios. The data is available for 46 countries. Data from 1950 to 2011 (2012) are historical data while data from 2012 (2013) are projections. In order to estimate the population in coming years, fertility rate, life expectancy and level of immigration have to be estimated. Assumptions underlying the estimations of each of these three elements are usually categorise as low, medium or high within one specific country. Where a range of projections are available, the projection data presented here are based on the "medium variant". Assumptions underlying the projection data shown are described country per country in the metadata table as well as the source of data. There are three sources for the data: national statistical institutes, Eurostat or the United Nations. The population data is presented in 18 five year age groups which refer to the population from 0-4 to 85 and more. The following age groups are also available: less than 15, less than 20, 15 to 64, 20-64, 65 and over. Age-dependency ratios are also presented. Assumptions by country. Data are presented for 46 countries. The 34 OECD member countries, the 6 EU countries not belonging to the OECD, and Brazil, Colombia, India, Indonesia, China, Russia and South Africa.

How’s Life? Well-being is the one-stop shop for the 80+ indicators of the OECD Well-being Dashboard, providing information on current well-being outcomes, well-being inequalities and the resources and risks that underpin future well-being. The 11 dimensions of current well-being relate to material conditions that shape people’s economic options (Income and Wealth, Housing, Work and Job Quality) and quality-of-life factors that encompass how well people are (and how well they feel they are), what they know and can do, and how healthy and safe their places of living are (Health, Knowledge and Skills, Environmental Quality, Subjective Well-being, Safety). Quality of life also encompasses how connected and engaged people are, and how and with whom they spend their time (Work-Life Balance, Social Connections, Civic Engagement). The distribution of current well-being is taken into account by looking at three types of inequality: gaps between population groups (horizontal inequalities); gaps between those at the top and those at the bottom of the achievement scale in each dimension (vertical inequalities); and deprivations (i.e. the share of the population falling below a given threshold of achievement). The systemic resources that underpin future well-being over time are expressed in terms of four types of capital: Economic, Natural, Human and Social.

ICT goods are those that are either intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR which use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process. ICT goods are defined by the OECD in terms of the Harmonised System. The guiding principle for the delineation of ICT goods is that such goods must either be intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process.Another guiding principle was to use existing classification systems in order to take advantage of existing data sets and therefore ensure the immediate use of the proposed standard. In this case, the underlying system is the Harmonized System (HS). The HS is the only commodity classification system used on a sufficiently wide basis to support international data comparison. A large number of countries use it to classify export and import of goods, and many countries use it (or a classification derived from or linked to it) to categorise domestic outputs.The application of the ICT product definition to selection of in-scope HS categories is a somewhat subjective exercise. The fact that the HS is not built on the basis of the functionality of products makes it much more difficult. The distinction between products which fulfil those functions and products that simply embody electronics but fundamentally fulfil other functions is not always obvious.It is possible to adopt a narrow or broad interpretation of the guideline, though the OECD chose a broader interpretation, an approach which is consistent with that adopted to develop the ICT sector definition.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older with a tertiary education.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible. The exact national source and reference period for each file is given in Table A.1 (see the methodological document).

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

This database presents the 2018 edition of OECD time-series indicators of implied R&D tax subsidy rates for OECD member countries and five non-member economies (Brazil, People's Republic of China, Romania, Russian Federation, and South Africa) over the period 2000-2018, drawing on data collected in the OECD-NESTI R&D tax incentive surveys from 2007 to 2018. The 2018 edition of RDTAXSUB contains time-series estimates that are based on headline tax credit and allowance rates, by firm size and profitability scenario. Due to limited historical data availability, the estimates are not adjusted for provisions that bound the tax benefits received by firms (e.g. ceilings, thresholds). They therefore provide an upper bound for the marginal tax subsidy implied by R&D tax relief measures across countries over time. These estimates should not be confused with separate contemporary cross-sectional OECD estimates of marginal tax subsidy rates (OECD, 2018) that compute adjusted (weighted) tax credit/allowance rates for a number of countries based on available information on the proportion of eligible R&D subject to different marginal levels of relief (see 2017).The tax subsidy rate is defined as 1 minus the B-index, a measure of the before-tax income needed by a “representative” firm to break even on USD 1 of R&D outlays (Warda, 2001). As tax component of the user cost of R&D, the B-Index is is directly linked to measures of effective marginal tax rates. Measures of tax subsidy rates such as those based on the B-index provide a convenient proxy for examining the implications of tax relief provisions. These provide a synthetic representation of the generosity of a tax system from the perspective of a generic or model type of firm for the marginal unit of R&D expenditure. To provide a more accurate representation of different scenarios, B-indices are calculated for “representative” firms according to whether they can claim tax benefits against their tax liability in the reporting period (OECD, 2013). When credits or allowances are fully refundable, the B-index of a firm in such a position is identical to the profit scenario. Carry-forwards are modelled as discounted options to claim incentives in the future, assuming a constant annual probability of returning to profit of 50% and a nominal discount rate of 10%. For general and country-specific notes on the time-series estimates of implied marginal tax subsidy rates on R&D expenditures (based on the B-index), see http://www.oecd.org/sti/rd-tax-stats-bindex-notes.pdf.

The allocation of bilateral intermediate imports across using industries assumes that import coefficients are the same for all trade partners, i.e. SHAREipkt is identical across exporter countries. Hence, the bilateral pattern of imported intermediates from industry p is the same across all using industries k. However, it is different from the bilateral pattern of total imports from industry p because trade data (measured by VALUEijpt) allows distinguishing bilateral imports of intermediates from final good imports in industry p. While the BEC classification enables the identification of intermediate goods, no similar classification is available for trade in services, due to the high level of aggregation in services trade data. While goods trade data are based on customs declarations allowing the identification of goods at a highly disaggregated level, services trade data are based on a variety of information such as business accounts, administrative sources, surveys, and estimation techniques (Manual on Statistics of International Trade in Services, 2002). Hence, in the case of trade in services, VALUEijpt is the total value of imports of service p, i.e. both final and intermediate (and not only services that are used in the production of other goods and services, as in the case of goods data). By making an additional assumption and adjusting SHAREipkt, it is however possible to calculate trade in intermediate services. In the case of services imports, SHAREipkt is the share of imported service inputs p used by industry k in total imports of p of country i. In the case of services, besides the assumption that all trading partners have the same distribution of intermediate imports p across using industries k, it is furthermore required that the share of intermediate services in overall bilateral services imports of country i is the same across all partner countries j. Finally, it should be mentioned that trade data reported in the trade statistics do not fully match imports as reported in I-O tables. One main reason is that while trade data is recorded at consumer prices, I-O tables are evaluated at producer prices. There are also other differences such as the treatment of re-exports, scrap metal, waste products and second hand goods or unallocated trade data.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

Incidence of employment by usual weekly hours worked: This table contains data on the cross-country distribution of employment by hour bands for declared hour bands, broken down by professional status - employees, total employment - sex and detailed age groups. In order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates

This table contains incidences and gender composition of part-time employment with standardised (15-24, 25-54, 55-64, 65+, total) and detailed age groups. Data are further broken down by professional status - employees, total employment. Part-time employment is based on a common 30-usual-hour cut-off in the main job. Unit of measure used - Data are expressed in percentages.

This table contains incidences and gender composition of part-time employment with standardised (15-24, 25-54, 55-64, 65+, total) and detailed age groups. Data are further broken down by professional status - employees, total employment. Part-time employment is based on national definitions. The definition of part-time work varies considerably across OECD countries Essentially three main approaches can be distinguished: i) a classification based on the worker's perception of his/her employment situation; ii) a cut-off (generally 30 or 35 hours per week) based on usual working hours, with persons usually working fewer hours being considered part-timers; iii) a comparable cut-off based on actual hours worked during the reference week. A criterion based on actual hours will generally yield a part-time rate higher than one based on usual hours, particularly if there are temporary reductions in working time as a result of holidays, illness, short-timing, etc. On the other hand, it is not entirely clear whether a classification based on the worker's perception will necessarily yield estimates of part-time work that are higher or lower than one based on a fixed cut-off. In one country (France) which changed from 1981 to 1982 from a definition based on an actual hours cut-off (30 hours) to one based on the respondent's perception, the latter criterion appeared to produce slightly higher estimates. Other data characteristics

This table contains data on the share of the five durations - less than 1 month,>1 month and < 3 months,>3 months and <6 months,>6 months and <1 year, 1 year and over - of unemployment among total unemployment by sex and by standardised age groups (15-19, 15-24, 20-24, 25-54, 55+, total). Unit of measure used - Data expressed in percentages.

http://www.oecd.org/els/soc/IDD-Metadata.pdf

This dataset presents internationally comparable data on instruction time in full-time compulsory education. It covers primary and (lower and upper) secondary general education, but excludes pre-primary education, even if compulsory. Total number of instruction hours and the distribution of hours per subject is available either by level of education or by age.

These data are part of a larger database, hosted on a different website, which includes both quantitative and qualitative data, as well as graphs.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Breakdown of net premiums written in the reporting country in terms of domestic risks and foreign risks, thus providing an indicator of direct cross-border operations of insurance business.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Covers business written abroad by branches, agencies and subsidiaries established abroad of domestic undertakings and includes all business written outside the country by these entities (in both OECD and non-OECD countries).

This data deals with premiums written by classes of non-life insurance for the business written in the reporting country.

Geographic coverage OECD countries, Selected African and Asian countries, Selected Latin American countries Institutional coverage The insurance industry is a key component of the economy by virtue of the amount of premiums it collects, the scale of its investment and, more fundamentally, the essential social and economic role it plays in covering personal and business risks. The "OECD Insurance Statistics" publication provides major official insurance statistics for all OECD countries. The reader will find information on the diverse activities of this industry and on international insurance market trends. The data, which are standardised as far as possible, are broken down under numerous sub-headings, and a series of indicators makes the characteristics of the national markets more readily comprehensible. This publication is an essential tool for civil servants, businessmen and academics working in the insurance field. Item coverage This part consists of tables by indicators, which reflect the most significant characteristics of the OECD insurance market. In most cases, the tables contain data of all OECD countries as well as aggregated "OECD", "EU15" (the 15 member countries of the European Union in 1995) and "NAFTA" data from 1983 to 2015, for the following categories: - life insurance, - non-life insurance - and total. The premiums amounts are converted from national currencies into US dollar. Exchange rates used are end-of-period exchanges rates for all variables valued at the end of the year, and period-average for variables representig a flow during the year.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. Among the few available indicators of technology output, patent indicators are probably the most frequently used. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are : patents have a close link to invention; patents cover a broad range of technologies on which there are sometimes few other sources of data; the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); and patent data are readily available from patent offices. However, patents are subject to certain drawbacks: the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value; many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.; the propensity to patent differs across countries and industries; differences in patent regulations make it difficult to compare counts across countries; and changes in patent law over the years make it difficult to analyse trends over time.

This dataset contains the number of people who graduated from an education programme by country of origin and sex.

Unit of measure used: Thousands   OECD countries seldom have tools specifically designed to measure the inflows and outflows of the foreign population, and national estimates are generally based either on population registers or residence permit data. This note is aimed at describing more systematically what is measured by each of the sources used.   Flows derived from population registers   Population registers can usually produce inflow and outflow data for both nationals and foreigners. To register, foreigners may have to indicate possession of an appropriate residence and/or work permit valid for at least as long as the minimum registration period. Emigrants are usually identified by a stated intention to leave the country, although the period of (intended) absence is not always specified.   When population registers are used, departures tend to be less well recorded than arrivals. Indeed, the emigrant who plans to return to the host country in the future may be reluctant to inform about his departure to avoid losing rights related to the presence on the register. Registration criteria vary considerably across countries (as the minimum duration of stay for individuals to be defined as immigrants ranges from three months to one year), which poses major problems of international comparison. For example, in some countries, register data cover a portion of temporary migrants, in some cases including asylum seekers when they live in private households (as opposed to reception centres or hostels for immigrants) and international students.   Flows derived from residence and/or work permits   Statistics on permits are generally based on the number of permits issued during a given period and depend on the types of permits used. The so-called “settlement countries” (Australia, Canada, New Zealand and the United States) consider as immigrants persons who have been granted the right of permanent residence. Statistics on temporary immigrants are also published in this database for these countries since the legal duration of their residence is often similar to long-term migration (over a year). In the case of France, the permits covered are those valid for at least one year (excluding students). Data for Italy and Portugal include temporary migrants.   Another characteristic of permit data is that flows of nationals are not recorded. Some flows of foreigners may also not be recorded, either because the type of permit they hold is not tabulated in the statistics or because they are not required to have a permit (freedom of movement agreements). In addition, permit data do not necessarily reflect physical flows or actual lengths of stay since: i) permits may be issued overseas but individuals may decide not to use them, or delay their arrival; ii) permits may be issued to persons who have in fact been resident in the country for some time, the permit indicating a change of status, or a renewal of the same permit.   Permit data may be influenced by the processing capacity of government agencies. In some instances a large backlog of applications may build up and therefore the true demand for permits may only emerge once backlogs are cleared.   Flows estimated from specific surveys   Ireland provides estimates based on the results of Quarterly National Household Surveys and other sources such as permit data and asylum applications. These estimates are revised periodically on the basis of census data. Data for the United Kingdom are based on a survey of passengers entering or exiting the country by plane, train or boat (International Passenger Survey). One of the aims of this survey is to estimate the number and characteristics of migrants. The survey is based on a random sample of approximately one out of every 500 passengers. The figures were revised significantly following the latest census in each of these two countries, which seems to indicate that these estimates do not constitute an “ideal” source either. Australia and New Zealand also conduct passenger surveys which enable them to establish the length of stay on the basis of migrants’ stated intentions when they enter or exit the country.

This indicator reports the percentage of students of each country of origin over the total of international students.

This table contains figures on affiliates under foreign control by investing country in the total manufacturing, total services and total business enterprise sectors.

The units used to present data in AFA are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

The IPP.Stat is the statistics portal of the Innovation Policy Platform containing the main available indicators relevant to a country’s innovation performance. In addition to the traditional indicators used to monitor innovation, the range of the coverage to be found in the IPP.Stat calls for the inclusion of indicators from other domains that describe the broader national and international context in which innovation occurs. Indicators are sourced primarily from the OECD and the World Bank, as well as from other sources of comparable quality. The statistics portal is still under development.

Job quality refers to multiple aspects of employment that contribute to well-being of workers and represents an inherently multi-dimensional construct. Job quality database focuses on three key dimensions. These are earnings quality, labour market security and quality of the working environment.

The Key Economic Indicators (KEI) database contains monthly and quarterly statistics (and associated statistical methodological information) for all OECD member countries and for a selection of non-member countries on a wide variety of economic indicators, namely: quarterly national accounts, industrial production, composite leading indicators, business tendency and consumer opinion surveys, retail trade, consumer and producer prices, hourly earnings, employment/unemployment, interest rates, monetary aggregates, exchange rates, international trade and balance of payments.

This dataset contains data on employment by hour bands for usual weekly hours worked in the main job.  Standard hour bands are reported for most countries.  Actual hours of work instead of usual hours of work are only available in some countries (Japan and Korea).  Data are broken down by professional status - employees, total employment - by sex and standardised age groups (15-24, 25-54, 55+, total). Unit of measure used - Data are expressed in thousands of persons. For detailed information on labour force surveys for all countries please see the attached file : www.oecd.org/els/employmentpoliciesanddata/LFSNOTE

Land resources are one of the four components of the natural environment: water, air, land and living resources. In this context land is both: a physical "milieu" necessary for the development of natural vegetation as well as cultivated vegetation;a resource for human activities.  The data presented here give information concerning land use state and changes (e.g. agricultural land, forest land).  Land area excludes area under inland water bodies (i.e. major rivers and lakes).   Arable refers to all land generally under rotation, whether for temporary crops (double-cropped areas are counted only once) or meadows, or left fallow (less than five years). These data are not meant to indicate the amount of land that is potentially cultivable.  Permanent crops are those that occupy land for a long period and do not have to be planted for several years after each harvest (e.g. cocoa, coffee, rubber). Land under vines and trees and shrubs producing fruits, nuts and flowers, such as roses and jasmine, is so classified, as are nurseries (except those for forest trees, which should be classified under "forests and other wooded land").  Arable and permanent crop land is defined as the sum of arable area and land under permanent crops.  Permanent meadows and pastures refer to land used for five years or more to grow herbaceous forage crops, either cultivated or growing wild (wild prairie or grazing land).  Forest refers to land spanning more than 0.5 hectare (0.005 km2) and a canopy cover of more than 10 percent, or trees able to reach these thresholds in situ. This includes land from which forests have been cleared but that will be reforested in the foreseeable future. This excludes woodland or forest predominantly under agricultural or urban land use and used only for recreation purposes.

The productivity and income estimates presented in this dataset are mainly based on GDP, population and employment data from the OECD Annual National Accounts. Hours worked are sourced from the OECD Annual National Accounts, the OECD Employment Outlook and national sources. The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, timely data issues may arise and affect individual series and/or individual countries. In particular, annual hours worked estimates from the OECD Employment Outlook are typically updated less frequently (once a year, in the summer) than series of hours worked from the OECD Annual National Accounts.

This table contains labour force data on labour market status - population, labour force, unemployment and employment - by sex and by detailed age groups and standard age groups (15-24, 25-54, 55-64, 65+, total). Note: Population figures reported in table LFS by sex are Census-based, while the data for this table are taken from labour force surveys. Population for total age group refers to working age population (15 to 64 years).

This table contains data on labour force participation rates, employment/population ratios and unemployment rates for both the total labour force and civilian labour force by sex. There are data for both the total age group and the working age population (ages 15 to 64). This table also contains data on the share of civilian employment by sex.

This dataset contains the age composition (as a percentage of all ages) of the population for each labour force status - labour force, employment, unemployment - by sex.

The OECD Long-Term Baseline Scenario is a projection of some major economic variables beyond the short-term horizon of the OECD Economic Outlook. It covers all OECD economies, non-OECD G20 economies and key partners. The projection horizon is currently 2060. For the historical period and the short-run projection horizon, the series are consistent with those of the OECD Economic Outlook number in the dataset title. The definitions, sources and methods are also the same, except where noted explicitly (such as coverage of the non-OECD and world aggregates). For more details on the methodology, please see Boxes 1 to 3 in The Long View: Scenarios for the World Economy to 2060 and the references therein.The baseline scenario is a projection conditional on a number of assumptions, notably that countries do not carry out institutional and policy reforms. It is used as a reference point to illustrate the potential impact of structural reforms in alternative scenarios, such as those discussed in The Long View: Scenarios for the World Economy to 2060. The data for these alternative scenarios are not available here but can be obtained on request by writing to EcoOutlook@oecd.org.

Main Economic Indicators (MEI) provides a wide range of indicators on recent economic developments in the 35 OECD member countries and 15 non-member countries. The indicators published in MEI have been prepared by national statistical agencies primarily to meet the requirements of users within their own country. In most instances, the indicators are compiled in accordance with international statistical guidelines and recommendations. However, national practices may depart from these guidelines, and these departures may impact on comparability between countries.

This biannual publication provides a set of indicators that reflect the level and structure of the efforts undertaken by OECD member countries and seven non-member economies (Argentina, People's Republic of China, Romania, Russian Federation, Singapore, South Africa, Chinese Taipei) in the field of science and technology. These data include final or provisional results as well as forecasts established by government authorities. The indicators cover the resources devoted to research and development, patent families, technology balance of payments and international trade in R&D-intensive industries. Also presented are the underlying economic series used to calculate these indicators. Indicators on R&D expenditures, budgets and personnel are derived from the OECD's Research and Development Statistics (RDS) database, which is based on the data reported to OECD and Eurostat in the framework of a co-ordinated collection. The sources for the other indicators include the OECD databases on Activities of Multinational Enterprises (AMNE), on Bilateral Trade in Goods by Industry and End-use Category database (BTDIxE), on Patents and on Technological Balance of Payments (TBP). The R&D data used in this publication have been collected and presented in line with the standard OECD methodology for R&D statistics as laid out in the OECD "Frascati Manual". The 2002 edition of the manual has now been superseded by the 2015 edition. The revised guidelines and definitions are in the course of being implemented and are not expected to change the main indicators significantly although some terminology changes will occur. This edition of MSTI has been compiled in accordance with the 2002 Frascati Manual; these changes will be made in a coming edition as R&D surveys move to the new standard.   2018 values are estimated value.

This dataset contains the number of Management personnel and teacher aides in educational institutions by sex and intensity.

The Maritime Transport Costs (MTC)database contains data from 1991 to the most recent available year of bilateral maritime transport costs. Transport costs are available for 43 importing countries (including EU15 countries as a custom union) from 218 countries of origin at the detailed commodity (6 digit) level of the Harmonized System 1988. This dataset should only be used in conjunction with the paper Clarifying Trade Costs in Maritime Transport which outlines methodology, data coverage and caveats to its use. Key Statistical Concept Import charges represent the aggregate cost of all freight, insurance and other charges (excluding import duties) incurred in bringing the merchandise from alongside the carrier at the port of export and placing it alongside the carrier at the first port of entry in the importing country. Insurance charges are therefore included in the transport cost variables and are estimated to be approximately 1.5% of the import value of the merchandise.

These data refer to material resources, i.e. materials originating from natural resources that form the material basis of the economy: metals (ferrous, non-ferrous) non-metallic minerals (construction minerals, industrial minerals), biomass (wood, food) and fossil energy carriers. 

This dataset presents members' total use of the multilateral system i.e. both their multilateral aid ("Core contributions to") and bilateral aid channelled through ("Contributions through") multilateral organisations. These data originate from members' reporting at item-level in the CRS and are published here starting with 2011 data (item-level data for multilateral aid is not complete in CRS for earlier years).

Despite the growing importance of international trade, driven in large part by the rise of globalisation and the accompanying international fragmentation of production, the availability of statistics on price change in international merchandise trade at more graular level is still limited. To fill this data gap, the OECD has developed this new Merchandise Trade Price Index (MTPI) database using UN COMTRADE. The first release covers about 100 countries from 2011 to 2017. Indices by reporting country are available for both exports and imports, broken down by 30 products, aligned with the 2-digit level of the Classification of Products of Activity (CPA, version 2.1). Future releases are planned to expand the country coverage and the level of disaggregation.

The aim of the OECD's new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

Database published : June 2020 

Database published : June 2020 

The International Trade (MEI) dataset contains predominantly monthly merchandise trade statistics, and associated statistical methodological information, for all OECD member countries and for all non-OECD G20 economies and the EU.   The dataset itself contains international trade statistics measured in billions of United States dollars (USD) for: Exports, Imports, Balance. In all cases a lot of effort has been made to ensure that the data are internationally comparable across all countries presented and that all the subjects have good historical time-series’ data to aid with analysis.

The Financial Statistics dataset contains predominantly monthly statistics, and associated statistical methodological information, for the 36 OECD member countries and some selected other countries. The dataset itself contains financial statistics on 4 separate subjects: Monetary Aggregates, Interest Rates, Exchange Rates, and Share Prices. The data series presented within these subjects have been chosen as the most relevant financial statistics for which comparable data across countries is available. In all cases a lot of effort has been made to ensure that the data are internationally comparable across all countries presented and that all the subjects have good historical time-series’ data to aid with analysis. All data are available monthly, and are presented as either an index (where the year 2015 is the base year) or as a level depending on which measure is seen as the most appropriate and/or useful in the economic analysis context.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) and ground-level ozone (O3) have potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. Exposure to ground-level ozone (O3) has serious consequences for human health, contributing to, or triggering, respiratory diseases. These include breathing problems, asthma and reduced lung function (WHO, 2016; Brauer et al., 2016). Ozone exposure is highest in emission-dense countries with warm and sunny summers. The most important determinants are background atmospheric chemistry, climate, anthropogenic and biogenic emissions of ozone precursors such as volatile organic compounds, and the ratios between different emitted chemicals.

This dataset presents trends in amounts of municipal waste generated (including household waste), and the treatment and disposal method used. The amount of waste generated in each country is related to the rate of urbanisation, the types and pattern of consumption, household revenue and lifestyles.

It presents gross capital formation, gross fixed capital formation, changes in inventories and acquisition less disposals of valuables broken down by detailed industries according to the classification ISIC rev.4. Gross fixed capital formation is also available broken down by type of assets. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2005). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents fixed assets by activity according to the classification ISIC rev.3 and by type of product and by type of assets.  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. In national currency, in current prices and constant prices (national base year and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents the balance sheets for non financial assets by institutional sectors, for both produced assets (fixed assets, inventories, valuables) and non-produced assets (tangible and intangible).  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

This dataset presents information using an "indicator" approach, focusing on cross-country comparisons. The aim is to make the accounts more accessible and informative, whilst taking the opportunity to present the conceptual underpinning  and comparability issues of each of the indicators presented. The range of indicators is set deliberately wide to reflect the richness of the national accounts dataset and to encourage users of economic statistics to refocus some of the spotlight that is often placed on GDP to other important economic indicators, which may better respond to their needs. Indeed many users themselves have been instrumental in this regard. The report of the Commission on the Measurement of Economic Performance and Social Progress (Stiglitz-Sen-Fitoussi Commission) is but one notable example. That is not to undermine the importance of GDP, which arguably remains the most important measure of total economic activity, but other measures may better reflect other aspects of the economy. For example, net national income may be a more appropriate measure of income available to citizens in countries with large outflows of property income, and household adjusted disposable income per capita may be a better indicator of the material well-being of citizens. But certainly from a data perspective more can and remains to be done. The Stiglitz-Sen-Fitoussi Commission for example highlights the pressing need for the provision, by official statistics institutes, of more detailed information that better describes the distributional aspects of activity, especially income, and the need to build on the national accounts framework to address issues such as non-market services produced by households or leisure. It is hoped that by producing a publication such as this and thereby raising awareness, the momentum from this and other initiatives will be accelerated. The publication itself will pick up new indicators in the future as they become available at the OECD.

It presents the whole set of non financial accounts, from the production account to the acquisitions of non-financial assets accounts. For general government sector, property income, other current transfers and capital transfers are consolidated..

It presents the whole set of non financial accounts, from the production account to the acquisitions of non-financial assets accounts. For general government sector, property income, other current transfers and capital transfers are consolidated.. It has been prepared from statistics reported to the OECD by Member countries in their answers to the new version of the annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA.

It presents gross capital formation, gross fixed capital formation, changes in inventories and acquisition less disposals of valuables broken down by detailed industries. Gross fixed capital formation is also available broken down by type of assets. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents the different transactions and balances to get from the GDP to the net lending/net borrowing. Therefore, it includes, in particular, national disposable income (gross and net), consumption of fixed capital as well as net saving.

It presents the final consumption expenditure of households broken down by the COICOP (Classification of Individual Consumption According to Purpose) classification and by durability.  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

National Accounts - Volume IIIa - Financial Accounts - Flows, which record, by type of financial instruments, the financial transactions between institutional sectors, and are presented in two tables: Financial accounts, consolidated and Financial accounts, non-consolidated.

It provides a faithful image, to the greatest extent possible, of the aggregates and balances of the general government sector in the SNA 1993 conceptual framework. In addition, it brings to light two relevant aggregates that do not belong to this conceptual frame work: the Total Revenue and the Total Expenditure of the general government sector. Unit of measure used - National currency; current prices. Expressed in millions.

Annual National Accounts>General Government Accounts>750. General Government Debt-Maastricht   Unit of measure used: National currency; current prices. Expressed in millions   Statistical population: Government debt as defined in the Maastricht Treaty (Source : Eurostat). Available for Europeans countries only. In the Protocol on the excessive deficit procedure annexed to the Maastricht Treaty, government debt is defined as the debt of the whole general government sector: gross, consolidated and nominal value (face value). It excludes the other accounts payable (AF.7), as well as, if they exist, insurance technical reserve (AF.6).

It provides a breakdown of government expenditure according to their function. To meet this end, economic flows of expenditure must be aggregated according to the Classification of the Functions of Government (COFOG).

It presents the three approaches of the GDP: expenditure based, output based and income based. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA.

Annual National Accounts>Detailed Tables and Simplified Accounts>7A. Labour input by activity, ISIC rev4   Unit of measure used: In persons, full-time equivalents, jobs and hours.   Statistical population: It presents employment, broken down by detailed industries according to the classification ISIC rev.4. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire.

It presents population data and employment by main activity. It includes national concept data for economically active population, unemployed persons, total employment, employees and self-employed, as well as domestic concept data for total employment, employees and self-employed. The domestic concept data are available broken down by main activity. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire.

It presents simplified non-financial accounts, from the gross value added to the net lending/net borrowing. In this table, the total economy is broken down in three main institutional sectors: corporations, general government, households and non-profit institutions serving households. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

Annual National Accounts>Supply and Use Tables>30. Supply at basic prices and its transformation into purchasers' prices   Unit of measure used: In national currency, in current prices and previous year prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Statistical population: It presents the Supply table at basic prices and its transformation into purchaser's prices. It provides information by industry (at the 2 digit ISIC Rev 4 level, containing 89 industries) with corresponding breakdowns by product (using the comparable CPA product breakdown). It has been prepared from statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.

Annual National Accounts>Supply and Use Tables>SUT Indicators>SUT Indicators   Statistical population: These indicators are calculated by the OECD from the SUT statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.   Key statistical concept: The supply table describes the supply of goods and services, which are either produced in the domestic industry or imported. The use table shows where and how goods and services are used in the economy. Therefore in addition to their essential role to better estimations of National Accounts, Supply and Use tables are also a very powerful tool to understand the impact of policy decisions and globalisation, as they provide a detailed analysis of the process of production and the use of goods and services. For example, the Supply and Use Tables could be used to measure the the percentage of imports used in the production process or the share of trade and transport margins in the households’ final consumption expenditure.

Annual National Accounts>Supply and Use Tables>31. Supply, Output and its components by industries   Unit of measure used: In national currency, in current prices and previous year prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Statistical population: It presents the breakdown of output at basic prices between market output, output for own final use and non-market output, by activty at the 2 digit ISIC Rev 4 level. It has been prepared from statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.

It provides a faithful image, to the greatest extent possible, of the aggregates and balances of the general government sector Data are also available, for most countries, for the sub-sectors of general government.

Annual National Accounts>Supply and Use Tables>40. Use at purchasers' prices   Unit of measure used: In national currency, in current prices and previous year prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Statistical population: It presents the Use table at purchaser's prices. It provides information by industry (at the 2 digit ISIC Rev 4 level, containing 89 industries) with corresponding breakdowns by product (using the comparable CPA product breakdown). It has been prepared from statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.

Annual National Accounts

Statistical population: Its presents output, intermediate consumption and the gross value added and its components, in particular compensation of employees and gross operating surplus and mixed income, broken down by detailed industries according to the classification ISIC rev.4. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. Unit of measure used: In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Note: 6A. Value added and its components by activity, ISIC rev4

Statistical population: Its presents output, intermediate consumption and the gross value added and its components, in particular compensation of employees and gross operating surplus and mixed income, broken down by detailed industries. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. Data presented in this table will not be updated after summer 2010. Data reported to the OECD by countries in their answers to the annual national accounts questionnaire are now available on theme Industry and Services, Structural Analysis (STAN) Databases. Unit of measure used: In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

Residential Property Prices Indices (RPPIs) – also named House price indices (HPIs), are index numbers measuring the evolution of residential property prices over time. RPPIs are key statistics not only for citizens and households across the world, but also for economic and monetary policy makers. Among their professional uses, they serve, for example, to monitor macroeconomic imbalances and risk exposure of the financial sector. This dataset includes RPPI compiled by official statistical agencies following international statistical guidelines. It covers all OECD member countries and some non-member countries. Whenever possible, these RPPIs are broken down by region, dwelling type (single- and multi-family dwellings) and vintage (new and existing dwellings). This dataset presents, for each country, the RPPI that is available at the most aggregate level at both national and regional levels. It mainly contains quarterly statistics. At regional level, the available RPPIs are classified according to the OECD Territorial Level (TL) classification whenever possible. Regions within the 37 OECD countries are classified on two territorials level reflecting the administrative organisation of countries. The 394 OECD large regions (TL2) represent the first administrative tier of subnational government, for example, the Ontario Province in Canada. The 2258 OECD small regions (TL3) correspond to administrative regions, with the exception of Australia, Canada and the United States. This classification – which, for European countries, is largely consistent with the Eurostat NUTS 2016 – facilitates greater comparability of geographic units at the same territorial level.The dataset called “National and Regional House Price Indices” contains the full list of available RPPIs. The dataset called “Analytical house price indicators” contains, in addition to nominal RPPIs, information on real house prices, rental prices and the ratios of nominal prices to rents and to disposable household income per capita. The datasets “Analytical house price indicators” and “National and Regional House Price Indices – Headline Indicators” do not refer to the same price indices for Brazil, Canada, China, Germany, the United States and the Euro area. These differences are further documented in country-specific metadata. For the United States, the series used in “Analytical house price indicators” is included in the dataset called “National and Regional House Price Indices”, but is not the headline indicator. For all other countries, non-seasonally adjusted price indices in both datasets are identical in the period in which they overlap.For all other countries, non-seasonally adjusted price indices in both datasets are identical on the overlapping period.

The "National CPI Weights" dataset contains the annual expenditure weights for the national CPI for the OECD Member countries at a detailed level of the COICOP classification (except Australia and Korea). The weight of a product in a CPI is the proportion of total household expenditure which is spent on that product during the weight reference period.

The dataset on Quarterly Sector Accounts data presents the whole set of non financial accounts for the institutional sectors.It includes the following accounts: - Production account / External account of goods and services - Generation of income account - Allocation of primary income account - Secondary distribution of income account - Use of disposable income account - Change in net worth due to saving and capital transfers accounts - Acquisitions of non-financial assets account - Balance sheets for non-financial assets - Employment by sector These accounts are designed to produce accounting balances that are of particular interest for economic analysis such as value added, operating surplus, saving or net lending/net borrowing. Quarterly Sector Accounts data have been reported to the OECD by Member countries and Key Partner countries using a standard questionnaire (simplified table T0119 or detailed table T0801). These questionnaires are designed to collect internationally comparable data according to definitions and concepts presented in the System of National Accounts (SNA 2008 or SNA 1993 for a few countries):

Non-medical determinants of health: Unhealthy lifestyles and poor environments cause millions of people to die prematurely. Smoking, harmful alcohol use, physical inactivity and obesity are the root cause of many chronic conditions. This dataset presents the latest data for tobacco consumption (including daily smokers by age and sex), vaping (by age and sex), alcohol consumption, fruits and vegetables consumption, as well as measured and self-reported data on overweight and obesity.

The OECD Digital Economy Outlook 2020 examines trends and analyses emerging opportunities and challenges in the digital economy. It highlights how OECD countries and partner economies are taking advantage of information and communication technologies (ICTs) and the Internet to meet their public policy objectives. Through comparative evidence, it informs policy makers of regulatory practices and policy options to help maximise the potential of the digital economy as a driver for innovation and inclusive growth.   This third edition of the OECD Digital Economy Outlook provides a holistic overview of converging trends, policy developments and data on both the supply and demand sides of the digital economy. It illustrates how the digital transformation is affecting economies and societies. Finally, it provides a special focus on how the COVID-19 pandemic is amplifying opportunities and challenges from the digital transformation.

This dataset covers the uses of wildlife resources and related pressures from human activities: fish production; catches of fish and other aquatic animals and products and the management of wildlife resources: biosphere reserves and wetlands of international importance; major protected areas.

In this version, seven GVCs indicators are presented for 59 economies (34 OECD and 23 non-OECD economies, plus the "rest of the world" and the European Union) for 18 industries in the years 1995, 2000, 2005, 2008 and 2009. The indicators are calculated based on the five global input-output matrices of the TiVA database. More details on the aggregation and specific country notes can be downloaded at http://www.oecd.org/sti/ind/input-outputtables.htm and http://oe.cd/gvc/.

This OECD inventory maps existing cross-country surveys that provide information on the characteristics of people's jobs. The information included in this inventory covers international surveys conducted since the early 1990s that are based on individuals' self-reported assessment of their current job, for 160 countries over 25 years. Survey questions are grouped into 19 indicators. For each indicator, binary codes (1 and 0) show whether indicators are available or not for the various countries and years. The inventory also provides users with detailed documentation on the questions used in the various surveys for measuring these indicators.

The OECD Science, Technology and Industry Outlook reviews key trends in STI policies and performance in OECD countries and major emerging economies. It is published every two years and draws on a unique international policy survey conducted by the OECD - with more than 45 countries involved in 2014 - and the latest OECD work on STI policy analysis and measurement. Following an overview of the recent STI global landscape, key current policy issues are discussed across a series of thematic policy profiles. Country profiles report the STI performance of individual countries and the most recent national policy developments.

The OECD Weekly Tracker of GDP growth provides a real-time high-frequency indicator of economic activity using machine learning and Google Trends data. It has a wide country coverage of OECD and G20 countries. The Tracker is thus particularly well suited to assessing activity during the turbulent period of the current global pandemic. It applies a machine learning model to a panel of Google Trends data for 46 countries, and aggregates together information about search behaviour related to consumption, labour markets, housing, trade, industrial activity and economic uncertainty.   The Weekly Tracker proxies the percent change in weekly GDP levels from the pre-crisis trend. The pre-crisis trend is taken from OECD forecasts made prior to the crisis (in the November 2019 Economic Outlook). Two other flavours of the Tracker are also available in the datafiles: a Tracker of weekly GDP growth year-on-year (that is, the percent change in weekly GDP from the same week in the past year), and a Tracker of weekly GDP growth year-on-two-year (the percent change in weekly GDP from the same week two years earlier). 

The Agricultural Outlook has been prepared as a joint report by the Organisation for Economic Co-operation and Development (OECD) and the Food and Agriculture Organization (FAO) of the United Nations. The report provides a ten year forward looking, assessment of trends and prospects in the major temperate-zone agricultural commodity markets of biofuels, cereals, oilseeds and oilseed products, sugar, meat, fish and sea food, dairy products, cotton, roots and tubers and pulses. It is published annually, in the middle of the second quarter, as part of a continuing effort to promote informed discussion of emerging market and policy issues. The data used to develop the projections underlying the assessment are those available as of January 2023. The projections and assessments provided in the report are the result of close co-operation between the OECD and FAO Secretariats and national experts with a jointly developed modelling system, based on the AGLINK-COSIMO model, used to facilitate consistency in the projections. The data series for the projections are drawn from OECD and FAO databases. For the most part information in these databases has been taken from national statistical sources. For further details on particular series, enquiries should be directed to the OECD and FAO Secretariats.

This table contains statistics on research and development (R&D) expenditure performed in the higher education and private non-profit sectors by field of science (natural sciences, engineering, medical sciences, agricultural sciences, social sciences, and humanities) and type of costs (current expenditures, capital expenditures).

Other official flows are official sector transactions which do not meet the ODA criteria, e.g.:  i.) Grants to developing countries for representational or essentially commercial purposes;  ii.) Official bilateral transactions intended to promote development but having a grant element of less than 25 per cent;  iii.) Official bilateral transactions, whatever their grant element, that are primarily export-facilitating in purpose. This category includes by definition export credits extended directly to an aid recipient by an official agency or institution ("official direct export credits");  iv.) The net acquisition by governments and central monetary institutions of securities issued by multilateral development banks at market terms;  v.) Subsidies (grants) to the private sector to soften its credits to developing countries [see Annex 3, paragraph A3.5.iv)b)];  vi.) Funds in support of private investment.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing, total services and total business enterprise sectors. The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing sector or in the total business sector. The units used to present data in AFA are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are :patents have a close link to invention;patents cover a broad range of technologies on which there are sometimes few other sources of data;the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); andpatent data are readily available from patent offices. However, patents are subject to certain drawbacks:the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value;many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.;the propensity to patent differs across countries and industries;differences in patent regulations make it difficult to compare counts across countries; andchanges in patent law over the years make it difficult to analyse trends over time. 

The OECD Pensions at a Glance Database has been developed in order to serve a growing need for pensions indicators. It includes reliable and internationally comparable statistics on public and mandatory and voluntary pensions. It covers 34 OECD countries and aims to cover all G20 countries. Pensions at a Glance reviews and analyses the pension measures enacted or legislated in OECD countries. It provides an in-depth review of the first layer of protection of the elderly, first-tier pensions across countries and provideds a comprehensive selection of pension policy indicators for all OECD and G20 countries.

The Population and Vital Statistics dataset presents components of change in the population during one year and mid-year population data for the 34 OECD member countries. Data are presented in thousands of persons and as rates in per 1000. The components of change in the population during one year are presented as follow: the first statistics refer to the population on January 1st for each year, the natural increase of the population is the difference between the number of births and deaths over the calendar year, the addition of net migration and statistical adjustments to the natural increase gives the total increase of the population over the calendar year. The addition of the total population increase to the population on January 1st gives the population on December 31st. Note: No longer this dataset be collected by OECD. Population and demographic events are available from the United Nation database at "https://esa.un.org/unpd/wpp/Download/Standard/Population/."    

This dataset contains the number of people by sex and age group per country.

This dataset presents annual population projections data up to 2061 by sex and five year age groups as well as the share of children, youth, the elderly, old-age and total dependency ratios. The data is available for all 38 member countries as well as for the EU27 and G20 countries, Singapore and the World total. Population projections are, in most countries, according to medium variant. (See country details for the variants retained for each demographic component of total fertility, life expectancy at birth and net annual migration).

Private transactions are those undertaken by firms and individuals resident in the reporting country.

This dataset presents activities in support of development from philanthropic foundations since 2009, including bilateral activities and core contributions to multilateral organisations. Bilateral activities from this dataset can also be found in the Creditor Reporting System (CRS) database. Collecting data on private philanthropy for development is work in progress, which may explain break in series for some foundations.

DUE TO CHANGES IN THE METHODOLOGY THE 2018 PMR VALUES CANNOT BE COMPARED WITH PREVIOUS VINTAGES. The 2018 OECD Indicators of Product Market Regulation (PMR) are a comprehensive and internationally-comparable set of indicators that measure the degree to which laws and policies promote or inhibit competition in areas of the product and service market where competition is viable. These indicators measure the de iure regulatory environments in 34 OECD countries and in a set of non-OECD countries in 2018. The economy-wide indicators cover the extent to which the involvement of the state in the economy can generate distortions to competition and the level of the barriers to entry and expansion to domestic and foreign firms in different sectors of the economy. Users of the data must be aware that they may no longer fully reflect the current situation in fast reforming countries.

The 'Production and Sales (MEI)' dataset is a dataset containing predominantly monthly statistics, and associated statistical methodological information, for the 34 OECD member countries and for selected other economies. The Production and Sales dataset contains industrial statistics on four separate subjects: Production; Sales; Orders; and Work started. The data series presented within these subjects have been chosen as the most relevant industrial statistics for which comparable data across countries is available. For Production, data comprise Indices of industrial production (IIP) for total industry, manufacturing, energy and crude petroleum; and further disaggregation of manufacturing production for intermediate goods and for investment goods and crude steel. For others, they comprise retail trade and registration of passenger cars; and permits issued and work started for dwellings. Considerable effort has been made to ensure that the data are internationally comparable across all countries presented, coverage for as many countries as possible, and that all the subjects have reasonable length of time-series to assist analysis. Most data are available monthly and are presented as an index (where the year 2010 is the base year) or as a level depending on which measure is seen as the most appropriate and/or useful in the economic analysis context. Due to differences in statistical or economic environment at country level, however, availability of data varies from one country to another.

The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the OECD Annual National Accounts database. However, timely data issues may arise and affect individual series and/or individual countries. Sectors differ from each other with respect to their productivity growth. Understanding the drivers of productivity growth at the total economy level requires an understanding of the contribution of each sector. Data of real gross value added, labour compensation, hours worked and employment are sourced from the OECD Annual National Accounts.

The OECD cross-section sectoral indicators measure regulatory conditions in the professional services and retail distribution sectors. The professional services indicators cover entry and conduct regulation in the legal, accounting, engineering, and architectural professions. They are now estimated for the years 1996, 2003, around 2008 and 2013 for 34 OECD countries and for another set of non-OECD countries for 2013. Users of the data must be aware that they may no longer fully reflect the current situation in fast reforming countries. Not all data are available for all countries for all years.

Distribution of graduates/new entrants by gender, country of origin and age as well as the proportion of each tertiary educational level over the total of first-time graduates and new entrants at tertiary level.

This dataset contains Purchasing Power Parities (PPPs) for all OECD countries. PPPs are the rates of currency conversion that eliminate the differences in price levels between countries. Per capita volume indices based on PPP converted data reflect only differences in the volume of goods and services produced. Comparative price levels are defined as the ratios of PPPs to exchange rates. They provide measures of the differences in price levels between countries. The PPPs are given in national currency units per US dollar. The price levels and volume indices derived using these PPPs have been rebased on the OECD average. Per capita volume indices should not be used to rank countries as PPPs are statistical constructs rather than precise measures. Minor differences between countries should be interpreted with caution.

OECD has extracted monthly trade data from the UN Monthly Comtrade database, and aggregates the quarterly and annual frequencies by summing up the months. This may create discrepancies with annual trade figures as presented in International Trade by Commodity Statistics (ITCS). UN Monthly Comtrade (beta version) contains detailed merchandise trade data provided by countries (or areas) to the United Nations Statistics Division, Department of Economic and Social Affairs (UNSD/DESA). Values are expressed in United States dollars (USD) and refer to declared transaction values. All exports are valued f.o.b. (free on board) and imports are valued c.i.f. (including cost, insurance, freight), except the imports of Canada and Mexico which are valued f.o.b. Detailed country metadata (currency conversion rates, information in HS classifications and data publication dates) can be found from the metadata file at the UN Monthly Comtrade website under the heading Metadata.

The OECD's quarterly national accounts (QNA) dataset presents data collected from all the OECD member countries and some other major economies on the basis of a standardised questionnaire. It contains a wide selection of generally seasonally adjusted quarterly series most widely used for economic analysis from 1960 or whenever available:

This database provides a set of indicators that reflect the level and structure of central government support for business R&D; in form of R&D; tax incentives and direct funding across OECD member countries and ten non-member economies (Argentina, Brazil, Bulgaria, Croatia, Cyprus, People's Republic of China, Romania, Russian Federation, and South Africa). This includes time-series indicators of tax expenditures for R&D;, based on the latest 2017 OECD data collection on tax incentive support for R&D; expenditures that was completed in July 2017. These estimates of the cost of R&D; tax relief have been combined with data on direct R&D; funding, as compiled by National Statistical Offices based on reports from firms, in order to provide a more complete picture of government efforts to promote business R&D.; The latest indicators and information on R&D; tax incentives also feature on the dedicated OECD website Measuring R&D; tax incentives.Tax expenditures are deviations from a benchmark tax system (OECD, 2010) and countries use different national benchmarks. Available estimates typically reflect the sum of foregone tax revenues – on an accruals basis – and refunds where applicable, with no or minimal adjustments for behavior effects. Some countries only report claims realised in a given year (cash basis), while others report losses to government on an accrual basis, excluding claims referring to earlier periods and including claims for current R&D; to be used in the future. For general and country-specific notes on the estimates of government tax relief for R&D; expenditures (GTARD), see http://www.oecd.org/sti/rd-tax-stats-gtard-notes.pdfThe sources for the other indicators (direct funding of BERD, BERD and GDP) include the OECD databases on Main Science and Technology Indicators and Eurostat R&D; statistics.

This table contains research and development (R&D) expenditure statistics on current domestic R&D and gross domestic R&D expenditures by sector of performance (business enterprise, government, higher education, private non-profit, and total intramural) and by type of R&D within each sector (basic research, applied research, experimental development, non-specified, and total activity). Unit of measure used - Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2005 prices and PPPs).

These tables present research and development (R&D) personnel statistics for : - Total R&D personnel by sector of employment and field of science, in full-time equivalent on R&D; - Researchers by sex, sector of employment and field of science, in full-time equivant on R&D; - Researchers by sex, sector of employment and field of science, in headcounts. Sectors of employment are business enterprise, government, higher education, private non-profit and total. Breakdown by field of science includes natural sciences, engineering, medical sciences, agricultural sciences, social sciences, and humanities.

These tables contain research and development (RD) personnel statistics. Number of RD personnel is provided in both headcounts and full-time equivalent on RD by sex, sector of employment (business enterprise, government, higher education, and private non-profit) and by occupation (researchers, technicians and other support staff).

This table presents research and development (R&D) personnel statistics. Number of R&D personnel is provided in headcounts and/or full-time equivalent on R&D by sex, sector of employment (business enterprise, government, higher education, and private non-profit) and by formal qualification (university and other diplomas by ISCED classification). Unit of measure used - Headcounts and/or Full-time equivalent on R&D (FTE)

This dataset presents reference statistics (GDP, Total Government Expenditure, deflators, etc.) that are used to calculate some of the indicators on educational expenditure included in the indicators dataset.

The Regional database contains annual data from 1995 to the most recent available year (generally 2022 for demographic and labor market data, 2021 for regional accounts, innovation and social statistics). 

The Regional database contains annual data from 1995 to the most recent available year (generally 2018 for demographic and labor market data, 2017 for regional accounts, innovation and social statistics). The data collection is undertaken by the Center for Entrepreneurship, SMEs, Regions and Cities (CFE). Statistics are collected through an annual questionnaire sent to the delegates of the Working Party on Territorial Indicators (WPTI), and via downloads from the web-sites of National Statistical Offices and Eurostat

The Regional Database contains annual data from 1995 to the most recent available year. The data collection is undertaken by the Directorate of Public Governance and Territorial Development, within the Regional Development Policy division (GOV/RDP). Statistics are collected through an annual questionnaire sent to the delegates of the Working Party on Territorial Indicators (WPTI), and through access to the web-sites of National Statistical Offices and Eurostat. The WPTI is responsible for developing regional (subnational) and urban statistics and providing analysis to support policy evaluations. The Regional Database includes statistics on the regional distribution of resources, regional disparities, and how regions contribute to national growth and the well-being of society. Under this framework, the Regional Database is one of the pillars for providing indicators to the publication OECD Regions at a Glance (link).

The Regional Database contains annual data from 1995 to the most recent available year (generally 2016 for demographic, 2015 for labor market data and 2014 for regional accounts, innovation and social statistics).

The Regional Database contains annual data from 1995 to the most recent available year (generally 2014 for demographic and labour market data, 2013 for regional accounts, innovation and social statistics).   In any analytical study conducted at sub-national levels, the choice of the territorial unit is of prime importance. The territorial grids (TL2 and TL3) used in this database are officially established and relatively stable in all member countries, and are used by many as a framework for implementing regional policies. This classification - which, for European countries, is largely consistent with the Eurostat classification - facilitates greater comparability of regions at the same territorial level. The differences with the Eurostat NUTS classification concern Belgium, Greece and the Netherlands where the NUTS 2 level correspond to the OECD TL3 and Germany where the NUTS1 corresponds to the OECD TL2 and the OECD TL3 corresponds to 97 spatial planning regions (Groups of Kreise). For the United Kingdom the Eurostat NUTS1 corresponds to the OECD TL2. Due to limited data availability, labour market indicators in Canada are presented for a different grid (groups of TL3 regions). Since these breakdowns are not part of the OECD official territorial grids, for the sake of simplicity they are labelled as Non Official Grids (NOG).

The OECD indicators of regulation in energy, transport and communications (ETCR) summarise regulatory provisions in seven sectors: telecoms, electricity, gas, post, rail, air passenger transport, and road freight. The ETCR indicators have been estimated in a long-time series and are therefore well suited for time-series analysis. The ETCR time series was updated, revised and now cover 34 OECD countries and a set of non-OECD countries for 2013. Users of the data must be aware that they may no longer fully reflect the current situation in fast reforming countries. Not all data are available for all countries for all years.

The PMR sector indicators measure the degree to which laws and policies promote or inhibit competition in seven network sectors (electricity, natural gas, air transport, rail transport, road transport, water transport and e-communications) and in eight service sectors (lawyers, notaries, accountants, civil engineers, architects, estate agents, retail trade and retail sales of medicines). The seven indicators for the network sectors are aggregated into a single indicator of regulation in network sectors. For more information:

The OECD cross-section sectoral indicators measure regulatory conditions in the professional services and retail distribution sectors. The retail indicators cover barriers to entry, operational restrictions, and price controls. These indicators were updated and revised; they are now estimated for 34 OECD countries for the years 1998, 2003, around 2008 and 2013 and for another set of non-OECD countries for 2013. Users of the data must be aware that they may no longer fully reflect the current situation in fast reforming countries. Not all data are available for all countries for all years.

Residential Property Prices Indices (RPPIs) – also named House price indices (HPIs), are index numbers that measure the price of residential properties over time. RPPIs are key statistics not only for citizens and households across the world, but also for economic and monetary policy makers. Among their professional uses, they serve, for example, to monitor macroeconomic imbalances and risk exposure of the financial sector. This dataset covers the 34 OECD member countries and some non-member countries. Please note that not all RPPIs are available for all countries. For instance, the RPPI at the most aggregate level for the United States only covers single-family dwellings, not all types of dwellings as it is the case for most other OECD countries. This dataset presents, for each country, the RPPI that is available at the most aggregate level. It mainly contains quarterly statistics. The dataset called “Residential Property Price Indices (RPPIs) – Complete dataset” contains the full list of available RPPIs. The dataset called “Analytical house price indicators” contains, in addition to nominal RPPIs, information on real house prices, rental prices and the ratios of nominal prices to rents and to disposable household income per capita. The datasets “Analytical house price indicators” and “Residential Property Price Indices (RPPIs) – Headline Indicators” do not refer to the same price indices for Brazil, Canada, China, Germany, the United States and the Euro area. These differences are further documented in country-specific metadata. For the United States, the series used in “Analytical house price indicators” is included in the dataset called “Residential Property Price Indices (RPPIs) – Complete database”, but is not the headline indicator. For all other countries, non-seasonally adjusted price indices in both datasets are identical in the period in which they overlap.For all other countries, non-seasonally adjusted price indices in both datasets are identical on the overlapping period.

Data on government sector receipts, and on taxes in particular, are basic inputs to most structural economic descriptions and economic analyses and are increasingly used in international comparisons. This annual database presents a unique set of detailed and internationally comparable data on both tax and non-tax revenue in a common format for African countries participating in Revenue Statistics in Africa. Click to collapse Direct source Country representatives authorized to obtain revenue data from the appropriate government departments and responsible for compiling the data and preparing data tables that adhere to the OECD tax classification.

A key set of information for policy analysis is i) how much revenue is collected; ii) in what ways is it collected; iii) from which institutional units of the economy are revenues raised for each particular financing scheme; and iv) which financing schemes receive those revenues. This dataset provides information about the contribution mechanisms the particular financing schemes use to raise their revenues. Understanding the nature of the flows is of importance from the perspective of both health and public finance policy. For example, the classification of revenues make it possible to distinguish between public and private funding of health care finance. Understanding how resources are raised by financing schemes is important for many countries, as many health systems are struggling with the issue of funding. The classification of revenues of financing schemes is suitable for tracking the collection mechanisms of a financing framework. Furthermore, the new classification makes it possible to analyse the contribution of the institutional units to health financing.

Trade in services drives the exchange of ideas, know-how and technology. It helps firms cut costs, increase productivity, participate in global value chains and boost competitiveness. Consumers benefit from lower prices and greater choice. However, international trade in services is often impeded by trade and investment barriers and domestic regulations. The Service Trade Restrictions Index (STRI) helps identify which policy measures restrict trade. It provides policy makers and negotiators with information and measurement tools to open up international trade in services and negotiate international trade agreements. It can also help governments identify best practice and then focus their domestic reform efforts on priority sectors and measures. The STRI indices take the value from 0 to 1, where 0 is completely open and 1 is completely closed. They are calculated on the basis of information in the STRI database which reports regulation currently in force.

This indicator shows the percentage of international students in each field of education.

The Short-Term Labour Market Statistics dataset contains predominantly quarterly labour statistics, and associated statistical methodological information, for the 35 OECD member countries and selected other economies. The Short-Term Labour Market Statistics dataset covers countries that compile labour statistics from sample household surveys on a monthly or quarterly basis. It is widely accepted that household surveys are the best source for labour market key statistics. In such surveys, information is collected from people living in households through a representative sample and the surveys are based on standard methodology and procedures used internationally. The subjects available cover: working age population by age; active and inactive labour force by age; employment by economic activity, by working time and by status; and, unemployment (including monthly harmonised unemployment) by age and by duration. Data is expressed in levels (thousands of persons) or rates (e.g. employment rate) where applicable.   Data are based on Labour Force Surveys and national information in this dataset is directly collected from the following sources:   ABS - Australian Bureau of Statistics (Australia) Statistics Canada (Canada) INE - Instituto Nacional de Estadísticas (Chile) CBS – Central Bureau of Statistics (Israel) Statistics Bureau (Japan) Statistics Korea (Korea) INEGI - Instituto Nacional de Estadísticas y Geografía (Mexico) Statistics New Zealand (New Zealand) BLS - Bureau of Labor Statistics (the United States) Eurostat (Austria, Belgium, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Luxembourg, the Netherlands, Norway, Poland, Portugal, the Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom).

The aim of the OECD’s new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

The aim of the OECD's new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

The aim of the OECD’s new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

The SIGI is built on 27 innovative variables measuring discriminatory social institutions, which are grouped into 4 dimensions: discrimination in the family, restricted physical integrity, restricted access to productive and financial resources, and restricted civil liberties.Lower values indicate lower levels of discrimination in social institutions: the SIGI ranges from 0% for no discrimination to 100% for very high discrimination.

The share of a population covered for a core set of health services offers an initial measure of access to care and financial protection. Most OECD countries have achieved universal or near-universal coverage for a core set of health services, which usually include consultations with doctors, tests and examinations, and hospital care.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as research and development Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as research and development Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as research and development Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as research and development Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

Excess capacity is one of the main challenges facing the global steel sector. The OECD Steelmaking Capacity database contains data on crude steelmaking capacity by economy and provides researchers and policymakers with an important tool for analysing steel capacity developments.

The OECD STRI heterogeneity indices complement the existing STRI's and presents indices of regulatory heterogeneity based on the rich information in the STRI regulatory database. The indices are built from assessing – for each country pair and each measure – whether or not the countries have the same regulation. For each country pair and each sector, the indices reflect the (weighted) share of measures for which the two countries have different regulation.

The OECD indicators of employment protection are synthetic indicators of the strictness of regulation on dismissals and the use of temporary contracts. For each year, indicators refer to regulation in force on the 1st of January. Version 1 of the indicator of strictness of employment protection - individual and collective dismissals (regular contracts) - does not incorporate all the data items of version 3 and, in particular, does not incorporate regulation of collective dismissals. You should only use version 1 if you need data for years for which neither version 2 nor 3 are available.

The OECD indicators of employment protection are synthetic indicators of the strictness of regulation on dismissals and the use of temporary contracts. For each year, indicators refer to regulation in force on the 1st of January. For more information and full methodology, see www.oecd.org/employment/protection.

The OECD indicators of employment protection are synthetic indicators of the strictness of regulation on dismissals and the use of temporary contracts. For each year, indicators refer to regulation in force on the 1st of January. For more information and full methodology, see www.oecd.org/employment/protection.

The OECD indicators of employment protection legislation evaluate the regulations on the dismissal of workers on regular contracts and the hiring of workers on temporary contracts. They cover both individual and collective dismissals.The indicators have been compiled using the Secretariat’s own reading of statutory laws, collective bargaining agreements and case law as well as contributions from officials from OECD member countries and advice from country experts

For data aligned to Finance, the year shown is the calendar year. For data aligned to personnel, the year shown is the year in which the end of the school year falls (e.g. 2002 refers to the school year 2001/2002), with the exceptions of Korea where the year refers to the year in which the school year begins and Australia and New Zealand where the school academic year corresponds to the calendar year.

Student-teacher ratio refers to the average number of students per teacher, while average class size is the average number of students in a classroom.

Data cited at: OECD (2020), Suicide rates (indicator). doi: 10.1787/a82f3459-en (Accessed on 18 August 2020) Suicide rates are defined as the deaths deliberately initiated and performed by a person in the full knowledge or expectation of its fatal outcome. Comparability of data between countries is affected by a number of reporting criteria, including how a person's intention of killing themselves is ascertained, who is responsible for completing the death certificate, whether a forensic investigation is carried out, and the provisions for confidentiality of the cause of death. Caution is required therefore in interpreting variations across countries. The rates have been directly age-standardised to the 2010 OECD population to remove variations arising from differences in age structures across countries and over time. The original source of the data is the WHO Mortality Database. This indicator is presented as a total and per gender and is measured in terms of deaths per 100 000 inhabitants (total), per 100 000 men and per 100 000 women.