Eurostat

Accommodation statistics are a key part of the system of tourism statistics in the EU and have a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases data are compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

20.1. Source data

This indicator presents electricity prices charged to final consumers. Electricity prices for non-household consumers are defined as follows: Average national price in Euro per kWh without taxes applicable for the first semester of each year for medium size industrial consumers (Consumption Band Ic with annual consumption between 500 and 2000 MWh). Electricity prices for household consumers are defined as follows: Average national price in Euro per kWh including taxes and levies applicable for the first semester of each year for medium size household consumers (Consumption Band Dc with annual consumption between 2500 and 5000 kWh).

The section 'LFS series - detailed quarterly survey results' reports detailed quarterly results going beyond the EU-LFS main aggregates, which have a separate data domain and some methodological differences. This data collection covers all main labour market characteristics, i.e. the total population, activity and activity rates, employment, employment rates, self employed, employees, temporary employment, full-time and part-time employment, population in employment having a second job, working time, total unemployment and inactivity. General information on the EU-LFS can be found in the ESMS page for 'Employment and unemployment (LFS)', see link in related metada. Detailed information on the main features, the legal basis, the methodology and the data as well as on the historical development of the EU-LFS is available on the EU-LFS (Statistics Explained) webpage.

Definition of an environmental tax (Regulation (EU) N° 691/2011) An environmental tax is a tax whose tax base is a physical unit (or a proxy of a physical unit) of something that has a proven, specific negative impact on the environment, and which is identified in ESA2010 as a tax. Eurostat collects data on environmental tax revenue (by tax category - energy, transport, pollution and resource taxes) broken down by economic activities (tax payers) using the NACE classification for production activities plus households and non-residents. Eurostat with the European Commission's Directorate General for Taxation and Customs Union also produces annually an analysis of each tax listed in the national accounts of European countries including: - assigning an economic function to each tax; - attributing an environmental code to the environmental taxes (E for Energy, T for Transport, P for Pollution, RS for Resource). These function and environmental codes are reported by countries in their national tax list (NTL) and are validated by Eurostat. Efforts are made to ensure full consistency of the data on environmental taxes by economic activities and revenue data based on the national tax lists even if some discrepancies remain for some countries.

A yield curve, also known as term structure of interest rates, represents the relationship between market remuneration (interest) rates and the remaining time to maturity of debt securities. The information content of a yield curve reflects the asset pricing process on financial markets. When buying and selling bonds, investors include their expectations of  future inflation, real interest rates and their assessment of risks. An investor calculates the price of a bond by discounting the expected future cash flows (coupon payments and/or redemption). ECB estimates zero-coupon yield curves for the euro area and also derives forward and par yield curves. A zero coupon bond is a bond that pays no cupon and is sold at a discount from its face value. The zero coupon curve represents the yield to maturity of hypothetical zero coupon bonds, since they are not directly observable in the market for a wide range of maturities. They must therfore be estimatedfrom existing zero coupon bonds and fixed coupon bond prices or yields.  The forward curve shows the short-term (instantaneous) interest rate for future periods implied in the yield curve. The par yield reflects hypothetical yields, namely the interest rates the bonds would have yielded had they been priced at par (i.e. at 100).

The House Price Index (HPI) measures inflation in the residential property market. The HPI captures price changes of all kinds of residential property purchased by households (flats, detached houses, terraced houses, etc.), both new and existing. Only market prices are considered, self-build dwellings are therefore excluded. The land component of the residential property is included. These indices are the result of the work that National Statistical Institutes (NSIs) have been doing mostly within the framework of the Owner-Occupied Housing (OOH) pilot project coordinated by Eurostat. HPI is available for EU Member States, Iceland and Norway. In addition to the individual country series Eurostat produces indices for the euro area and for the EU. The national HPIs are produced by NSIs, while the European aggregates are computed by Eurostat, by aggregating the national indices. The data released quarterly on Eurostat's website include price indices themselves as well as their rates of change compared to the same quarter of the previous year. House Sales cover the total value of dwellings transactions at national level (both houses and flats) where the purchaser is a household. House Sales indicators complement the data on the HPI in order to offer a more comprehensive picture of the housing market. At this moment Eurostat is publishing the annual index for the value of housing transactions and the annual rate of change.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of an  economic area during a given period and provides harmonized information on international transactions which are part of the current account, the capital and the financial account. Data on International Trade in Services (ITS), are an important component of the BoP current account, and are used, alongside with data on Foreign Direct Investment, to monitor the external commercial performance of different economies. ITS data are collected by national enterprise surveys, International Transaction System (ITRS) and administrative records. Guidance for compilers is provided in the Manual on Statistics of International Trade in services 2010 (http://unstats.un.org/unsd/tradeserv/TFSITS/msits2010/docs/MSITS%202010%20M86%20(E)%20web.pdf)

Labour cost statistics constitute a hierarchical system of multi-annual, yearly and quarterly statistics, designed to provide a comprehensive and detailed picture of the level, structure and short-term development of labour costs in the different sectors of economic activity in the European Union and certain other countries. All statistics are based on a harmonised definition of labour costs. The quarterly Labour Cost Index (LCI) is a Euro Indicator which measures the cost pressure arising from the production factor "labour". The data covered in the LCI collection relate to total average hourly labour costs and to the labour cost categories "wages and salaries" and "employers' social security contributions plus taxes paid minus subsidies received by the employer". Data - also broken down by economic activity, are available for the EU aggregates and EU Member States (NACE Rev 1.1 Sections C to K (1996Q1-2008Q4) and NACE Rev 2 Sections B to S), in working day and seasonally adjusted form. The data on the Labour Cost Index are given in the form of index numbers (current base year: 2016) and of annual and quarterly growth rates (comparison with the previous quarter, or the same quarter of the previous year). On annual basis the labour cost levels (in Euro and national currency) are also published, based on the latest Labour Cost Survey inflated by the LCI. In contrast to the information collected for the other Labour Cost domains, the labour costs covered in the LCI do not include vocational training costs and other expenditure such as recruitment costs and working clothes expenditure. The data are estimated by the National Statistical Institutes on the basis of available structural and short-term information from samples and administrative records for enterprises of all sizes. The labour cost index (LCI) shows the short-term development of the labour cost, the total cost on an hourly basis of employing labour. In other words, the LCI measures the cost pressure arising from the production factor “labour”.  In addition, Eurostat estimates of the annual labour cost per hour in euros are provided for EU Member States as well as the whole EU; they were obtained by combining the four-yearly Labour cost survey (LCS) with the quarterly labour cost index. 

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Long term government bond yields are calculated as monthly averages (non seasonally adjusted data). They refer to central government bond yields on the secondary market, gross of tax, with a residual maturity of around 10 years. The bond or the bonds of the basket have to be replaced regularly to avoid any maturity drift. This definition is used in the convergence criteria of the Economic and Monetary Union for long-term interest rates, as required under Article 121 of the Treaty of Amsterdam and the Protocol on the convergence criteria. Data are presented in raw form. Source: European Central Bank (ECB)

Accommodation statistics are a key part of the system of tourism statistics in the EU and have a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases data are compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

The indicator measures the share of obese people based on their body mass index (BMI). BMI is defined as the weight in kilos divided by the square of the height in meters. People aged 18 years or over are considered obese with a BMI equal or greater than 30. Other categories are: underweight (BMI less than 18.5), normal weight (BMI between 18.5 and less than 25), and pre-obese (BMI between 25 and less than 30). The category overweight (BMI equal or greater than 25) combines the two categories pre-obese and obese.

Owners occupiers are those households that live in a dwelling (flat, house) that they own. Owner occupier's housing expenditures represent those expenditures incurred by owners occupiers when purchasing, maintaining and living in their own home. The Owner-Occupied Housing Price Index (OOHPI) measures the change over time in the transaction prices of dwellings that were purchased for own-use and the cost of all goods and services that households purchase in their role as owners occupiers of dwellings (see classification below). As the index is based on the net acquisitions approach, only purchased dwellings that are new to the household sector are covered, while transactions between households are excluded (see section 3.4 Statistical concepts and definitions) . These indices are the result of the work that National Statistical Institutes (NSIs) have been doing since 2001 within the framework of the Owner-Occupied Housing (OOH) pilot project coordinated by Eurostat. OOHPIs are available for 26 EU Member States, plus Iceland and Norway (published for 27 countries). The data that is released quarterly on Eurostat's website include price indices themselves as well as their rates of change compared to the previous quarter (Qt-1) and the same quarter of the previous year (Qt-4).

The data in this dataset comes from the Common Questionnaire for Transport Statistics, developed and surveyed in co-operation between the United Nations Economic Commission for Europe (UNECE), the International Transport Forum (ITF) and Eurostat. The Common Questionnaire is not supported by a legal act, but is based on a gentlemen's agreement with the participating countries; the completeness varies from country to country. Eurostat’s datasets based on the Common Questionnaire cover annual data for the EU Member States, EFTA states and Candidate countries to the EU. Data for other participating countries are available through the ITF and the UNECE. In total, comparable transport data collected through the Common Questionnaire is available for close to 60 countries worldwide. The Common Questionnaire collects aggregated annual data on: Railway transportRoad transportInland waterways transportOil pipelines transportGas pipelines transport For each mode of transport, the Common Questionnaire cover some or all of the following sub-modules (the number of questions/variables within each sub-module varies between the different modes of transport): Infrastructure (All modes)Transport equipment (RAIL, ROAD and INLAND WATERWAYS)Enterprises, economic performance and employment (All modes)Traffic (RAIL, ROAD and INLAND WATERWAYS)Transport measurement (All modes) Accidents (ROAD only) The Common Questionnaire is completed by the competent national authorities. The responsibility for completing specific modules (e.g. Transport by Rail) or part of modules (e.g. Road Infrastructure) may be delegated to other national authorities in charge of specific fields.

The data in this dataset comes from the Common Questionnaire for Transport Statistics, developed and surveyed in co-operation between the United Nations Economic Commission for Europe (UNECE), the International Transport Forum (ITF) and Eurostat. The Common Questionnaire is not supported by a legal act, but is based on a gentlemen's agreement with the participating countries; the completeness varies from country to country. Eurostat’s datasets based on the Common Questionnaire cover annual data for the EU Member States, EFTA states and Candidate countries to the EU. Data for other participating countries are available through the ITF and the UNECE. In total, comparable transport data collected through the Common Questionnaire is available for close to 60 countries worldwide. The Common Questionnaire collects aggregated annual data on: Railway transportRoad transportInland waterways transportOil pipelines transportGas pipelines transport For each mode of transport, the Common Questionnaire cover some or all of the following sub-modules (the number of questions/variables within each sub-module varies between the different modes of transport): Infrastructure (All modes)Transport equipment (RAIL, ROAD and INLAND WATERWAYS)Enterprises, economic performance and employment (All modes)Traffic (RAIL, ROAD and INLAND WATERWAYS)Transport measurement (All modes) Accidents (ROAD only) The Common Questionnaire is completed by the competent national authorities. The responsibility for completing specific modules (e.g. Transport by Rail) or part of modules (e.g. Road Infrastructure) may be delegated to other national authorities in charge of specific fields.

Non-expenditure health care data provide information on institutions providing health care in countries, on resources used and on output produced in the framework of health care provision. Data on health care form a major element of public health information as they describe the capacities available for different types of health care provision as well as potential 'bottlenecks' observed. The quantity and quality of health care services provided and the work sharing established between the different institutions are a subject of ongoing debate in all countries. Sustainability - continuously providing the necessary monetary and personal resources needed - and meeting the challenges of ageing societies are the primary perspectives used when analysing and using the data. The resource-related data refer to both human and technical resources, i.e. they relate to: - 'Health care staff': 'manpower' active in the health care sector (doctors, dentists, nurses, etc.); - 'Health care facilities': technical capacity dimensions (hospital beds, beds in nursing and residential care facilities, etc.). Annual national and regional data are provided in absolute numbers and in population-standardised rates (per 100 000 inhabitants). Wherever applicable, the definitions and classifications of the System of Health Accounts (SHA) are followed, e.g. International Classification for Health Accounts - Providers of health care (ICHA-HP). For hospital discharges, the International Shortlist for Hospital Morbidity Tabulation (ISHMT) is used. Health care data on resources are largely based on administrative data sources in the countries. Therefore, they reflect the country-specific way of organising health care and may not always be completely comparable.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.