Suriname

The indicator measures the share of material recovered and fed back into the economy - thus saving extraction of primary raw materials - in overall material use. The circular material use (CMU) rate is defined as the ratio of the circular use of materials to the overall material use. The overall material use is measured by summing up the aggregate domestic material consumption (DMC) and the circular use of materials. DMC is defined in economy-wide material flow accounts. The circular use of materials is approximated by the amount of waste recycled in domestic recovery plants minus imported waste destined for recovery plus exported waste destined for recovery abroad. Waste recycled in domestic recovery plants comprises the recovery operations R2 to R11 - as defined in the Waste Framework Directive 75/442/EEC. The imports and exports of waste destined for recycling - i.e. the amount of imported and exported waste bound for recovery – are approximated from the European statistics on international trade in goods. A higher CMU rate value means that more secondary materials substitute for primary raw materials thus reducing the environmental impacts of extracting primary material.

The indicator measures the volume of aggregated consumption of chemicals for the EU27 (from 2020), expressed in million tonnes. The consumption of chemicals is calculated as the sum of the production volumes (PRODCOM) and the net import volumes of the chemicals (COMEXT) according to the equation: Consumption = production + imports – exports. The data on hazardous and non-hazardous chemicals show the total consumption of all chemicals regardless of their hazardousness. The two sub-categories on consumption of hazardous chemicals – hazardous to human health and hazardous to the environment – overlap by definition and data cannot be summed up.

20.1. Source data

The indicator measures the waste collected by or on behalf of municipal authorities and disposed of through the waste management system. It consists to a large extent of waste generated by households, though similar wastes from sources such as commerce, offices and public institutions may be included.

Total amount of waste generated by households and businesses by economic activity according to NACE Rev. 2 and year.

Waste generated by households (EP-HH) and by waste category (EWC-Stat 4) and hazardousness, latest available year.

The focus of this domain is on the European Neighbourhood Policy (ENP) countries on the southern and eastern shores of the Mediterranean (ENP-South), namely: Algeria (DZ),Egypt (EG),Israel (IL),Jordan (JO),Lebanon (LB),Libya (LY),Morocco (MA),Palestine (PS),Syria (SY) andTunisia (TN). An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. The data and their denomination in no way constitute the expression of an opinion by the European Commission on the legal status of a country or territory or on the delimitation of its borders.

Total amount of waste generated by households and businesses, by waste category (EWC-Stat 4) and year.

On the basis of the Regulation on waste statistics (EC) No. 2150/2002, amended by Commission Regulation (EU) No. 849/2010, data on the generation and treatment of waste is collected from the Member States. The information on waste generation has a breakdown in sources (19 business activities according to the NACE classification and household activities) and in waste categories (according to the European Waste Classification for statistical purposes). The information on waste treatment is broken down to five treatment types (recovery, incineration with energy recovery, other incineration, disposal on land and land treatment) and in waste categories. All values are measured in tonnes of waste and in kg per capita, based on the annual average of the population. The Member States are free to decide on the data collection methods. The general options are: surveys, administrative sources, statistical estimations or some combination of methods. For the first reference year 2004 Member States could apply for permission not to deliver part of the information: waste generated by agriculture and fishing and waste generated in the services sector. For this reason this information is missing for some of the countries. Previously data on waste was collected on a voluntary basis with the joint OECD/Eurostat questionnaire on waste.

This indicator is defined as all waste generated in a country per inhabitant and year, excluding major mineral wastes, dredging spoils and contaminated soils. This exclusion enhances comparability across countries as mineral waste accounts for high quantities in some countries and economic activities such as mining and construction. The indicator covers hazardous (hz) and non-hazardous (nh) waste from all economic sectors and from households, including waste from waste treatment (secondary waste) but excluding most mineral waste. It is based on data compiled according to the waste categories listed in Annex I to the Waste Statistics Regulation (Regulation 2150/2002/EC).

18.1. Source data

The indicator measures all waste generated in a country. Due to the strong fluctuations in waste generation in the mining and construction sectors and their limited data quality and comparability, major mineral wastes, dredging spoils and soils are excluded. This exclusion enhances comparability across countries as mineral waste accounts for high quantities in some countries with important economic activities such as mining and construction.

The indicator is defined as all waste generated in a country (in mass unit), excluding major mineral wastes, per GDP unit (in euro, chain linked volumes (2010)). The ratio is expressed in kg per thousand EUR.

Direct greenhouse gases: Carbon Dioxide (CO2), Methane (CH4), Nitrous Oxide (N2O), Hydrofluorocarbons (HFC-23, 32, 125, 134a, 143a, 152a, 227ea, 236fa, 245fa, 365mfc, 43-10-mee), Perfluorocarbons (PFCs: CF4, C2F6, C3F8, c-C4F8, C4F10, C5F12, C6F14, C7F16), Sulfur Hexafluoride (SF6), Nitrogen Trifluoride (NF3) and Sulfuryl Fluoride (SO2F2). Emissions are calculated by individual countries using country-specific information. The countries are organized in different world regions for illustration purposes. Emissions of some small countries are presented together with other countries depending on country definition and availability of activity statistics. Source: European Commission, Joint Research Centre (JRC)/PBL Netherlands Environmental Assessment Agency.

The indicator, expressed in percentage, is defined as the volume of waste landfilled (directly or indirectly) in a country per year divided by the volume of the waste treated in the same year. The data reflect the treatment of national waste and exclude waste that is imported from non-EU countries. Waste taken into account excludes mineral waste from construction and demolition, other mineral wastes, soils and dredging spoils. This exclusion enhances comparability across countries, as mineral waste accounts for high quantities in some countries due to economic activities such as mining and construction. One exception, however, is that the indicator explicitly includes combustion wastes and solidified, stabilised and vitrified wastes, despite them being completely or partly mineral. The indicator is derived from the two-yearly reporting of the countries according to the Waste Statistics Regulation. It covers landfilling of hazardous and non-hazardous waste from all economic sectors and from households, including waste from waste treatment (secondary waste) but excluding most mineral waste, and waste going into pre-treatment activities (like sorting, drying). Disposal on land is defined by disposal codes D1, D5, D12 and labeled ‘deposit onto or into land’ (summarized as code DSP_L in the database). The indicator is based on data compiled according to Annex I of the Waste Statistics Regulation (Regulation (EC) No 2150/2002) and the statistical waste nomenclature EWC-Stat set out in Annex III.

The focus of this domain is on the European Neighbourhood Policy (ENP) countries on the southern and eastern shores of the Mediterranean (ENP-South), namely: Algeria (DZ),Egypt (EG),Israel (IL),Jordan (JO),Lebanon (LB),Libya (LY),Morocco (MA),Palestine (PS),Syria (SY) andTunisia (TN). An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. The data and their denomination in no way constitute the expression of an opinion by the European Commission on the legal status of a country or territory or on the delimitation of its borders.

On the basis of the Regulation on waste statistics (EC) No. 2150/2002, amended by Commission Regulation (EU) No. 849/2010, data on the generation and treatment of waste is collected from the Member States. The information on waste generation has a breakdown in sources (19 business activities according to the NACE classification and household activities) and in waste categories (according to the European Waste Classification for statistical purposes). The information on waste treatment is broken down to five treatment types (recovery, incineration with energy recovery, other incineration, disposal on land and land treatment) and in waste categories. All values are measured in tonnes of waste and in kg per capita, based on the annual average of the population. The Member States are free to decide on the data collection methods. The general options are: surveys, administrative sources, statistical estimations or some combination of methods. For the first reference year 2004 Member States could apply for permission not to deliver part of the information: waste generated by agriculture and fishing and waste generated in the services sector. For this reason this information is missing for some of the countries. Previously data on waste was collected on a voluntary basis with the joint OECD/Eurostat questionnaire on waste.

On the basis of the Regulation on waste statistics (EC) No. 2150/2002, amended by Commission Regulation (EU) No. 849/2010, data on the generation and treatment of waste is collected from the Member States. The information on waste treatment is broken down to six treatment types (recovery, incineration with energy recovery, other incineration, disposal on land and land treatment and other disposal). All values are measured in tonnes of waste. The waste management indicator set aims at showing how much of a country’s or of the EU’s own waste (in the following referred to as national waste) excluding major mineral waste is actually recycled, incinerated (with energy recovery and without), landfilled or backfilled. This means that the waste management indicator should reflect the treatment of national waste, no matter where it takes place, and it should exclude the waste that is imported from non-EU countries.  Thus for the compilation of a waste management indicator data, which is collected under the Waste Statistic Regulation, is to be adjusted with data for imports and exports from Foreign Trade Statistics. The imports and exports of goods (and wastes) are reported according to the Combined Nomenclature (CN-codes). The data are available from Eurostat's COMEXT database, which includes detailed statistics on the intra- and extra-trading in goods of all EU Member States.  International trade in goods statistics (ITGS) published by Eurostat measures the value and quantity of goods traded between the EU Member States (intra-EU trade) and goods traded by the EU Member States with non-EU countries (extra-EU trade). ‘Goods’ means all movable property. The CN codes relating to import or export of waste are selected and assigned to one of the treatment types according to the predominant kind of treatment for this kind of waste in the receiving country. A list with these CN codes and their assignment to treatment type is annexed to this Metadatasheet. Member States were asked whether the data and the assignment was plausible. In case of inconsistencies Member States were asked for a different assignment; they could as well provide data, in case it was in their opinion more suitable than the COMEXT data (this was 2010, 2012  and 2014 the case for Denmark, Croatia, Cyprus, Italy, Latvia, Malta, The Netherlands, Portugal, Romania and Slovakia and 2014 for Ireland, see also 14.1).

On the basis of the Regulation on waste statistics (EC) No. 2150/2002, amended by Commission Regulation (EU) No. 849/2010, data on the generation and treatment of waste is collected from the Member States. The information on waste treatment is broken down to six treatment types (recovery, incineration with energy recovery, other incineration, disposal on land and land treatment and other disposal). All values are measured in tonnes of waste. The waste management indicator set aims at showing how much of a country’s or of the EU’s own waste (in the following referred to as national waste) excluding major mineral waste is actually recycled, incinerated (with energy recovery and without), landfilled or backfilled. This means that the waste management indicator should reflect the treatment of national waste, no matter where it takes place, and it should exclude the waste that is imported from non-EU countries.  Thus for the compilation of a waste management indicator data, which is collected under the Waste Statistic Regulation, is to be adjusted with data for imports and exports from Foreign Trade Statistics. The imports and exports of goods (and wastes) are reported according to the Combined Nomenclature (CN-codes). The data are available from Eurostat's COMEXT database, which includes detailed statistics on the intra- and extra-trading in goods of all EU Member States.  International trade in goods statistics (ITGS) published by Eurostat measures the value and quantity of goods traded between the EU Member States (intra-EU trade) and goods traded by the EU Member States with non-EU countries (extra-EU trade). ‘Goods’ means all movable property. The CN codes relating to import or export of waste are selected and assigned to one of the treatment types according to the predominant kind of treatment for this kind of waste in the receiving country. A list with these CN codes and their assignment to treatment type is annexed to this Metadatasheet. Member States were asked whether the data and the assignment was plausible. In case of inconsistencies Member States were asked for a different assignment; they could as well provide data, in case it was in their opinion more suitable than the COMEXT data (this was 2010, 2012  and 2014 the case for Denmark, Croatia, Cyprus, Italy, Latvia, Malta, The Netherlands, Portugal, Romania and Slovakia and 2014 for Ireland, see also 14.1).

Municipal waste is mainly produced by households, similar wastes from sources such as commerce, offices and public institutions are included. The amount of municipal waste generated consists of waste collected by or on behalf of municipal authorities and disposed of through the waste management system. The amount of municipal waste treatment is reported for the treatment operations incineration (with and without energy recovery), recycling, composting and landfilling. Data are available in thousand tonnes and kilograms per person. Wastes from agriculture and from industries are not included. For further detail on the definition please refer to section 3.4. The Sustainable Development Indicator on municipal waste is expressed in kilograms per person.

20.1. Source data

The indicator measures the percentage of population connected to wastewater treatment systems with at least secondary treatment. Thereby, wastewater from urban sources or elsewhere is treated by a process generally involving biological treatment with a secondary settlement or other process, resulting in a removal of organic material that reduces the biochemical oxygen demand (BOD) by at least 70 % and the chemical oxygen demand (COD) by at least 75 %.

This dataset provides estimates of the production, value added, exports and employment of the environmental goods and services sector (EGSS). The EGSS is the part of the economy that generate environmental products, i.e. those produced for the purpose of environmental protection and resource management. Environmental protection includes all activities and actions which have as their main purpose the prevention, reduction and elimination of pollution and of any other degradation of the environment. Those activities and actions include all measures taken in order to restore the environment after it has been degraded. Resource management includes the preservation, maintenance and enhancement of the stock of natural resources and therefore the safeguarding of those resources against depletion. The EGSS accounts are produced in accordance with the statistical concepts and definitions set out in the system of environmental economic accounting 2012 – central framework (SEEA CF 2012, see annex). Datasets env_ac_egss1 and env_ac_egss2 consist of country data produced by the Member States, who transmit the data to Eurostat and further disseminates it. The EU estimates in datasets env_ac_egss1, env_ac_egss2 and env_ac_egss3 are produced by Eurostat not as a sum of available countries but using methods documented in the Eurostat EGSS practical guide (see methodology page) and data sources publicly available. In addition, Eurostat produces output and gross value added volume estimates, i.e. discounting changes in prices, for all countries published in dataset env_ac_egss2.

The indicator measures the share of a country’s, or the EU’s, own waste, which is recycled. Due to the strong fluctuations in waste generation in the mining and construction sectors and their limited data quality and comparability, major mineral wastes, dredging spoils and soils are excluded. This exclusion enhances comparability across countries as mineral waste accounts for high quantities in some countries and economic activities such as mining and construction. The data reflect the treatment of national waste and exclude waste that is imported from other EU countries; on EU total level the waste imports from non-EU countries are excluded. In the source dataset, the information on waste treatment is broken down into six treatment types: recovery (recycling, energy recovery, backfilling) and disposal (incineration, landfill, other disposal. The indicator presents only data on the treatment type of recovery - recycling.

The indicator is indirectly measured as the ratio of composted/methanised municipal waste (in mass unit) over the total population (in number). The ratio is expressed in kg per capita. The underlying assumption is that, by and large, the only reasonable treatment of biowaste is composting or anaerobic digestion.

The indicator is calculated as recycled waste (RCV_R) divided by total waste treated excluding major mineral wastes (TRT), multiplied by 100. It is expressed in percent (%) as both terms are measured in the same unit, namely tonnes. Recycled waste is waste treated, which was sent to recovery operation other than energy recovery and backfilling (for simplification referred to as recycling). Waste data are adjusted for waste collected in one country and recycled in another country. The amount of recycled waste is adjusted as following: waste treated in domestic plants plus waste sent out of the country for recycling minus waste imported and treated in domestic recycling plants. Waste treated is based in Waste Statistics Regulation and the imports and exports of wastes are based on Foreign Trade Statistics and reported according to the Combined Nomenclature (CN-codes). The indicator covers both hazardous (hz) and non-hazardous (nh) waste from all economic sectors and from households, including waste from waste treatment (secondary waste) but excluding most mineral waste. Major mineral waste is excluded in order to avoid situations where trends in ordinary waste generation can be drowned out by massive fluctuations in the generation of wastes in the mineral extraction and transformation sector. This also permits more meaningful comparison across countries, as mineral waste accounts for very substantial quantities in countries characterized by major mining and construction sectors.

The indicator is calculated by multiplying the 'collection rate' as set out in the WEEE Directive with the 'reuse and recycling rate' set out in the WEEE Directive; where: o The 'collection rate' equals the volumes collected of WEEE in the reference year divided by the average quantity of electrical and electronic equipment (EEE) put on the market in the previous three years (both expressed in mass unit). o The 'reuse and recycling rate' is calculated by dividing the weight of WEEE that enters the recycling/preparing for re-use facility by the weight of all separately collected WEEE (both in mass unit) in accordance with Article 11(2) of the WEEE Directive 2012/19/EU, considering that the total amount of collected WEEE is sent to treatment/recycling facilities. The indicator is expressed in percent (%) as both terms are measured in the same unit.

The indicator measures the share of recycled municipal waste in the total municipal waste generation. Recycling includes material recycling, composting and anaerobic digestion. The ratio is expressed in percent (%) as both terms are measured in the same unit, namely tonnes.

Information and data are collected based on the Directive 2006/66/EC on batteries and accumulators and waste batteries and accumulators (subsequently called Battery Directive) and in Commission Decision 2008/763/EC establishing a common methodology for the calculation of annual sales of portable batteries and accumulators to end-users, and on Commission Regulation (EU) No 493/2012 laying down detailed rules regarding the calculation of recycling efficiencies of the recycling processes of waste batteries and accumulators. The purpose of the collected data is to monitor compliance of countries with the quantitative targets for collection of batteries and accumulators that are set out in Article 10(2) and for recycling of batteries and accumulators that are set out in Article 12 (4) and in Annex III (Part B: Recycling) of the Directive. The Battery Directive distinguishes between portable batteries and accumulators on the one hand and industrial and automotive batteries and accumulators on the other. The collection target refers to portable batteries and accumulators and the recycling targets to all batteries and accumulators. Further information on the policy need of data on batteries and accumulators can be found on the following website of Directorate General Environment: http://ec.europa.eu/environment/waste/batteries/index.htm

Trade in recyclable raw material shows the amounts (in mass unit) and the monetary value (in Euro) of total wastes that are shipped across intra- and extra EU borders. The dataset includes following variables: Imports to EU countries of recyclable raw materials (in order to characterise intra-EU trade);Imports from non-EU countries and exports to non-EU countries of recyclable raw materials (in order to characterise trade of the EU with the rest of the world).Exports to EU countries of recyclable raw materials, (in order to characterise trade among EU countries). Data are disaggregated by EU-Member State and by category of material, following the classification provided by the JRC (see list of CN-codes used). This dataset is taken from International Trade in Goods Statistics (ITGS) published by Eurostat. The data measure both the monetary value and the physical quantity of goods traded between the EU Member States (intra-EU trade) and of goods traded by the EU Member States with non-EU countries (extra-EU trade). ‘European’ means that the statistics are compiled on the basis of the concepts and definitions set out in EU legislation. ‘National’ statistics, i.e. statistics published at national level by the Member States, are compiled on the basis of national rules which may differ from EU rules. Product coverage: The scope of the “recyclable raw material” is defined and approximated in terms of relevant product codes selected from the list of Combined Nomenclature codes used in International Trade in Goods Statistics. They are grouped according to JRC classification which provides a breakdown for the following material classes: PlasticPaper and cardboardPrecious metalIron and steelCopper, aluminium and nickel

The focus of this domain is on the European Neighbourhood Policy (ENP) countries on the southern and eastern shores of the Mediterranean (ENP-South), namely: Algeria (DZ),Egypt (EG),Israel (IL),Jordan (JO),Lebanon (LB),Libya (LY),Morocco (MA),Palestine (PS),Syria (SY) andTunisia (TN). An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. The data and their denomination in no way constitute the expression of an opinion by the European Commission on the legal status of a country or territory or on the delimitation of its borders.

On the basis of the Regulation on waste statistics (EC) No. 2150/2002, amended by Commission Regulation (EU) No. 849/2010, data on the generation and treatment of waste is collected from the Member States. The information on waste generation has a breakdown in sources (19 business activities according to the NACE classification and household activities) and in waste categories (according to the European Waste Classification for statistical purposes). The information on waste treatment is broken down to five treatment types (recovery, incineration with energy recovery, other incineration, disposal on land and land treatment) and in waste categories. All values are measured in tonnes of waste and in kg per capita, based on the annual average of the population. The Member States are free to decide on the data collection methods. The general options are: surveys, administrative sources, statistical estimations or some combination of methods. For the first reference year 2004 Member States could apply for permission not to deliver part of the information: waste generated by agriculture and fishing and waste generated in the services sector. For this reason this information is missing for some of the countries. Previously data on waste was collected on a voluntary basis with the joint OECD/Eurostat questionnaire on waste.

Data on Waste electrical and electronic equipment (WEEE) is collected on the basis of  Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE).The purpose of the collected data is to monitor compliance of countries with the quantitative targets for collection, reuse and recycling, and recovery of WEEE that are set out in Article 7 (collection rate) and article 11 ( recovery targets). Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) introduces stepwise higher collection targets that will apply from reference year 2016 and 2019. Further information on the policy need of data on WEEE can be found on the following website of Directorate General Environment: http://ec.europa.eu/environment/waste/weee/index_en.htm

The indicator presents the amount of waste excluding major mineral wastes generated in the EU 28, expressed in kg per inhabitant and year. The indicator allows to monitor waste generation over time for the EU as a whole and to compare the development of waste generation across countries. The indicator covers hazardous and non-hazardous waste from all economic sectors and from households, including waste from waste treatment (secondary waste) but excluding major mineral wastes. The indicator is based on data compiled according to Annex I of the Waste Statistics Regulation (Regulation 2150/2002/EC) and according to aggregates of the material-oriented statistical waste nomenclature EWC-Stat in Annex III of the Waste Statistics Regulation (WStatR). Key policy question: Waste prevention: Are we reducing the generation of waste - Basic data: Eurobase, table Generation of waste (env_wasgen) For more detail see item 13. Relevance

Waste generated by households (EP-HH) by year and waste category (EWC-Stat 4).

Yearly data on freshwater resources, water abstraction and use, wastewater treatment (connection rates of resident population to wastewater treatment and treatment capacities of wastewater treatment plants), sewage sludge production and disposal, generation and discharge of wastewater collected biennially by means of the OECD/Eurostat Joint Questionnaire - Inland Waters. Data aggregation: national territories.